CTD with startdate 1940 onwards in GWX

diemayer · 10-31-13, 06:15 AM

Hi folks

My problem with GWX3 is that i crash everytime when i start a 1940 or 1941 campaign, 1939 campaigns seem to work fine.

I thought this might be memory overloading due to large traffic density in later years but i could also load heavy mods like
fm_interior, GWX wilhelms st. Naz Schleuse v6, MEP20km, Aces super turms 6 and even the very high polygonal new type IX models by Wise in single missions and 1939 campaign

Note: I encountered this problem even with a clean GWX3 installation without additional mods, so mod conflict is out of question

Can you help me

Jimbuna · 10-31-13, 09:38 AM

Best way to approach this would be for you to post your system specs and a full list of activated mods.

Myxale · 10-31-13, 10:33 AM

^ What Jim said.

And also...do you use the SH3 Commander? And if so, have you installed the GWX cfg. files for SH3 Commander?

diemayer · 10-31-13, 03:47 PM

Quote:

Originally Posted by Jimbuna

Best way to approach this would be for you to post your system specs

Amd Athlon 7750 2x2.7GHz (~2x2.2/2.3 GHz in practice)
Radeon HD 5450 1 GB DDR3
2 gigs of Ram
and of course good ol' XP 32 bit

Quote:

Originally Posted by Jimbuna

and a full list of activated mods.

maybe it wasn't quite clear what I said. I used additional Mods for testing purpose but i am now experiencing these problems on a clean installation of Silent Hunter 3 1.4b + GWX 3.0

I made some testruns and here are the results:

1939 - Kiel/1.Flotilla works fine
1939 - Wilhelmshaven/2.Flotilla works fine
1939 - Koenigsberg/7;13.Flotilla no problems either

1940 - Kiel crash while loading
1940 - Lorient crash
1940 - St. Nazaire ""
1941 - Kiel ""
1941 - St. Nazaire ""
1942 - Bergen ""
1943 - La Spezia ""
1944 - Penang ""
1945 - Flensburg ""

it crashes with message "Silent Hunter III encountered a problem...blablabla"

So, only the 1939 startdate seems to work
I haven't tested proceeding into the next year with a 1939 career, so i don't know if it will crash

Quote:

Originally Posted by Myxale

And also...do you use the SH3 Commander? And if so, have you installed the GWX cfg. files for SH3 Commander?

yes, i have SH3 commander installed, also with the GWX cfg files. However i haven't modified my GWX installation with it.

i could also think of a corrupted installation or JSGME made rubbish while disabling Mods.
So for now i'm going to delete everything and reinstall SH3+GWX and see if this fixes the problem

diemayer · 10-31-13, 04:58 PM

Ok reinstallation fixed the problem

(the crashes might have been caused by remaining mod files)

HW3 · 10-31-13, 08:20 PM

I have found that to be the best option. I have had problems in the past with rolling back all the JSGME mods, deleting the data file, and using a saved plain data file updated to 1.4b. A complete reinstall is always the best way to do it.

Myxale · 11-01-13, 04:35 AM

Good to know it worked out.
Reinstalling can be a bore, but if it works yay.

Sailor Steve · 11-01-13, 05:38 AM

I try not to think about how many dozens of times I've reinstalled SH3 over the past eight-and-a-half years.

Jimbuna · 11-01-13, 05:54 AM

Quote:

Originally Posted by diemayer

Ok reinstallation fixed the problem

(the crashes might have been caused by remaining mod files)

Pleased your sorted

10-31-13, 06:15 AM	#1
diemayer Nub Join Date: Mar 2011 Location: Germany Posts: 4 Downloads: 58 Uploads: 0	CTD with startdate 1940 onwards in GWX Hi folks My problem with GWX3 is that i crash everytime when i start a 1940 or 1941 campaign, 1939 campaigns seem to work fine. I thought this might be memory overloading due to large traffic density in later years but i could also load heavy mods like fm_interior, GWX wilhelms st. Naz Schleuse v6, MEP20km, Aces super turms 6 and even the very high polygonal new type IX models by Wise in single missions and 1939 campaign Note: I encountered this problem even with a clean GWX3 installation without additional mods, so mod conflict is out of question Can you help me

10-31-13, 09:38 AM	#2
Jimbuna Chief of the Boat Join Date: Feb 2006 Location: 250 metres below the surface Posts: 181,198 Downloads: 63 Uploads: 13	Best way to approach this would be for you to post your system specs and a full list of activated mods. __________________ Wise men speak because they have something to say; Fools because they have to say something. Oh my God, not again!! GWX3.0 Download Page - Donation/instant access to GWX (Help SubSim)

10-31-13, 10:33 AM	#3
Myxale Admiral Join Date: Feb 2006 Location: PQ AN 25 Posts: 2,178 Downloads: 70 Uploads: 0	^ What Jim said. And also...do you use the SH3 Commander? And if so, have you installed the GWX cfg. files for SH3 Commander? __________________ SH3+GWX SH5+WoS Still Sailing....still Deep

10-31-13, 08:20 PM	#6
HW3 Navy Seal Join Date: Apr 2005 Location: Gresham Oregon Posts: 6,439 Downloads: 453 Uploads: 0	I have found that to be the best option. I have had problems in the past with rolling back all the JSGME mods, deleting the data file, and using a saved plain data file updated to 1.4b. A complete reinstall is always the best way to do it. __________________ "Some ships are designed to sink...others require our assistance." Nathan Zelk

11-01-13, 04:35 AM	#7
Myxale Admiral Join Date: Feb 2006 Location: PQ AN 25 Posts: 2,178 Downloads: 70 Uploads: 0	Good to know it worked out. Reinstalling can be a bore, but if it works yay. __________________ SH3+GWX SH5+WoS Still Sailing....still Deep

10-31-13, 04:58 PM	#5
diemayer Nub Join Date: Mar 2011 Location: Germany Posts: 4 Downloads: 58 Uploads: 0	Ok reinstallation fixed the problem (the crashes might have been caused by remaining mod files)

11-01-13, 05:38 AM	#8
Sailor Steve Eternal Patrol Join Date: Nov 2002 Location: High in the mountains of Utah Posts: 50,369 Downloads: 745 Uploads: 249	I try not to think about how many dozens of times I've reinstalled SH3 over the past eight-and-a-half years. __________________ “Never do anything you can't take back.” —Rocky Russo