Mission Editor Issues, Anomalies & Bugs - Page 4

Mittelwaechter · 04-14-08, 07:36 AM

Sorry, Mate - no way to change the water colour via SH3 Editor.

Search for "Water Color" or similar , or for "Mini Tweaker" to get some info how to manage it.

Where to get your missions?

tomfon · 08-31-09, 05:53 AM

Hallo. I'm sorry for opening this thread but i it seems that i run into some kind of problem with the Mission Editor and i can't find the solution myself.
So, on my disk D i have 3 SH3 installations which correspond to a GWX3, WAC4 and NYGM3.3 installation. There is also a fourth SH3 installation on my C disk (C:\Program Files\Ubisoft\SilentHunterIII) ; this is a vanilla installation.
I meet no problem when i create a mission, everything goes fine i.e. creation, validation, saving. BUT: When i fire up SH3 and select the mission just before loading it, the game won't let me see the description of the mission which is usually displaced on that virtual white paper signed by a BdU officer. Moreover, the mission won't load. I click on "LOAD" and the game doesn't load the mission. In fact, nothing happens.
The same thing happens for every mission i create with any mission editor installed in any of the 3 SH3 installations on disk D. I once tried to create a mission and load it with the mission editor installed in the vanilla installation but it made no difference.

Any clue?

Any help appreciated.

Graf Paper · 09-01-09, 03:17 AM

Let's say you've just created a mission for your installation. Double-check these steps:

Make sure you're using the SH3 Mission Editor located inside the folder of the game version for which you're making the mission. This is required because the data for the world map and units (ships, planes, etc.) is loaded from the game installation where you started the Mission Editor. So creating missions for, say, GWX would require loading the ME from that folder.
When saving your mission, make sure the mission name is exactly the same as the folder. For example, you've created a mission named "Convoy Attack". In the SH3 install where you wish to save it, you'll see a folder called "data". Inside there is the folder labeled "MultiMissions". This is where all multiplayer missions are located. Inside that folder you'll see three more folders labeled "English", "French", and "German". Let's say your mission is in the English language. Inside the "English" folder, you'll see a list of other folders bearing the names of missions. Create a new folder here with the same name as your mission and then save your newly created mission inside there. So the folder path would look like this:

Code:

Your SH3 Installation
              |
            data
               |
             MultiMissions
                     |
                   English
                         |
                    Convoy Attack (save the Convoy Attack mission inside)

Your mission should load just fine now.

I usually set up my missions to work with JSGME, so I can keep them seperated from the "stock" missions of standard or modded SH3 installations. It makes it easier to add new missions and also save a backup if I ever need to reinstall my game.

Now go sink some Tommies!

tomfon · 09-01-09, 02:48 PM

Thank you Graf Paper.

It seems that everything is OK with the ME. I created a test mission and fired up my NYGM installation. I'll check the ME in my GWX install too just to make sure.

Cheers!

Vann · 06-01-10, 08:35 PM

Hello..

HAve done all the steps in tutorials to create basic missions.. but when i start the mission ,looking for the most simple possible mission ..ie to sink a merchant ship near.problem is that when game start , instead of 1 Uboat for the player.. i get Two. and they are exactly at the same position and heading, looks like a game bug... Dont know how im doing this .. since i only place 1 submarine and 1 merchant ship in world map.. and nothing else. place the dates and parameters and trigers and objectives and events and validate with no problems.

another problem is that i set the dates for merchant and Sub exactly the same.. at same hour.. and use same date/hour for parameters menu.. but when game start.. from 1942 that all was set ..the patrol begins at 1940.. when clearly i have 1942 every where in the game whenever is a start date option.

i save the single missions as . misge extension as the tutorial says .
using the same name as the project file.

any help appreciated

Mittelwaechter · 06-15-10, 07:40 AM

Hi Vann,

it's some time I scripted my last mission, but let's see how far we get.

Open your MIS with SH3 Mission Editor and delete your U-Boot by marking the U-Boot Icon and hitting 'DEL' key.

If you have to do it twice to remove the sub you have created both subs (one over the other) by yourself. I guess you checked the multiplayer checkbox in parameters too.

Now drag and drop your chosen U-Boot type into the desired location and rightclick to open properties. Check the entry dates of the unit provided by the properties screen to match your timeframe.

Set a waypoint and turn your sub accordingly.

Now open Mission in menubar and choose Parameters.

Here you find the settings for Single- or Multiplayer - check the singleplayer box. And you find the start date settings for your mission. Check and change the data accordingly.

Save the mission as normal mission as ???.mis - choose whatever name you want and make sure to insert this MIS into a folder named exactly ???.

Put the ??? folder into the singlemissions folder in the games root directory.

Ingame select the correct U-Boot and timeframe for your mission.

Feel free to ask if something is not clear enough.

von faust · 02-02-11, 01:05 PM

(I'm sorry, I'm using Google translator

)
After enabling various MOD (GWX, FM_Interior, Magui) the mission editor is damage and appears like this:

I did the same thing on laptop and it happened the same problem.
I have try to disable all mods but the problem persist.
Have You any idea ?

Thanks

Jimbuna · 02-02-11, 01:27 PM

Are you running a res fix mod?

Version 2 of ME is available from my FF account.

von faust · 02-02-11, 02:09 PM

Quote:

Originally Posted by jimbuna

Are you running a res fix mod?
.

Yes

Quote:

Originally Posted by jimbuna

Version 2 of ME is available from my FF account.

I have download Your MissionEditorx2 but I have the same problem, strange

EDIT: Your response ispired me an idea, I have removed temporarily "d3d9.cfg" and "d3d9.dll" and now mission editor work fine !!!!

Thank You !!!

Jimbuna · 02-02-11, 05:03 PM

Quote:

Originally Posted by von faust

Yes

I have download Your MissionEditorx2 but I have the same problem, strange

EDIT: Your response ispired me an idea, I have removed temporarily "d3d9.cfg" and "d3d9.dll" and now mission editor work fine !!!!

Thank You !!!

Your welcome

Echolot · 02-04-11, 01:41 PM

Hi.

Maybe you could try this:

Start Notepad.

Add:

ren d3d9.dll d3d9.tmp
sh3missioneditor
ren d3d9.tmp d3d9.dll

Save to SHIII directory.

Rename the new file to "MissionEditor.bat" and send to desktop (shortcut).

Rename the shortcut on desktop to "MissionEditor". You can change the icon in the

properties of the shortcut. Icons in SilentHunterIII/Sh3MissionEditor.exe.

Run the MissionEditor with the shortcut. The small command line window you can

minimze, it will disappear when you close the MissionEditor.

Echolot.

01-21-13, 10:40 PM

Hello,

Not sure if you solved this problem, but I just figured this out just now. After doing some searching, make your AA settings to application controlled in CCC.

Even AF too, if you must. But for me, I run an HD 6850 and just changing the AA to application controlled did it for me.

Good luck.

07-19-16, 09:20 AM

Hello all,

I don't know if this is the correct thread to post my question, and i'm sorry if it was not.

I would like to know if my problem is just a known bug, or if it's just me doing something wrong ...

So : i have created a mission with my submarine, and also a german airplane. The mission starts on January 1st, 10:30. The airplane appears the same day but at 11:00, 100 km away from my sub. I set : "evolve from entry date". But when i play the mission, the airplane doesn't spawn at all .......

What's wrong ??

Edit : if i do the same thing with a ship, the ship spawns ...

Jimbuna · 07-19-16, 04:52 PM

Have you set the spawning parameter at 100%?

Jeff-Groves · 07-19-16, 05:21 PM

What Aircraft and what is it's Entry date?
Say your mission is set in 1940 and the entry date for the plane is 1941.
The plane will not spawn.

04-14-08, 07:36 AM	#1
Mittelwaechter The Old Man Join Date: Apr 2007 Posts: 1,304 Downloads: 35 Uploads: 0	Sorry, Mate - no way to change the water colour via SH3 Editor. Search for "Water Color" or similar , or for "Mini Tweaker" to get some info how to manage it. Where to get your missions? __________________ 10 happy wolves rear 90 blinded, ensnared sheep. 90 happy sheep banish the wolves. Arrest the 1% - https://www.youtube.com/watch?v=dQ6hg1oNeGE

08-31-09, 05:53 AM	#2
tomfon Grey Wolf Join Date: Jan 2008 Location: CK7662 Posts: 918 Downloads: 178 Uploads: 4	Mission Editor issue Hallo. I'm sorry for opening this thread but i it seems that i run into some kind of problem with the Mission Editor and i can't find the solution myself. So, on my disk D i have 3 SH3 installations which correspond to a GWX3, WAC4 and NYGM3.3 installation. There is also a fourth SH3 installation on my C disk (C:\Program Files\Ubisoft\SilentHunterIII) ; this is a vanilla installation. I meet no problem when i create a mission, everything goes fine i.e. creation, validation, saving. BUT: When i fire up SH3 and select the mission just before loading it, the game won't let me see the description of the mission which is usually displaced on that virtual white paper signed by a BdU officer. Moreover, the mission won't load. I click on "LOAD" and the game doesn't load the mission. In fact, nothing happens. The same thing happens for every mission i create with any mission editor installed in any of the 3 SH3 installations on disk D. I once tried to create a mission and load it with the mission editor installed in the vanilla installation but it made no difference. Any clue? Any help appreciated. __________________ "I would rather have questions that can't be answered than answers which can't be questioned." - Richard P. Feynman [1918/1988] "I've missed more than 9000 shots in my career. I've lost almost 300 games. 26 times, I've been trusted to take the game winning shot and missed. I've failed over and over and over again in my life. And that is why I succeed." - Michael Jordan Mods for SH3

09-01-09, 03:17 AM	#3
Graf Paper Ace of the Deep Join Date: Jan 2008 Location: Pacific Northwest United States Posts: 1,146 Downloads: 41 Uploads: 2	Let's say you've just created a mission for your installation. Double-check these steps: Make sure you're using the SH3 Mission Editor located inside the folder of the game version for which you're making the mission. This is required because the data for the world map and units (ships, planes, etc.) is loaded from the game installation where you started the Mission Editor. So creating missions for, say, GWX would require loading the ME from that folder. When saving your mission, make sure the mission name is exactly the same as the folder. For example, you've created a mission named "Convoy Attack". In the SH3 install where you wish to save it, you'll see a folder called "data". Inside there is the folder labeled "MultiMissions". This is where all multiplayer missions are located. Inside that folder you'll see three more folders labeled "English", "French", and "German". Let's say your mission is in the English language. Inside the "English" folder, you'll see a list of other folders bearing the names of missions. Create a new folder here with the same name as your mission and then save your newly created mission inside there. So the folder path would look like this: Code: Your SH3 Installation \| data \| MultiMissions \| English \| Convoy Attack (save the Convoy Attack mission inside) Your mission should load just fine now. I usually set up my missions to work with JSGME, so I can keep them seperated from the "stock" missions of standard or modded SH3 installations. It makes it easier to add new missions and also save a backup if I ever need to reinstall my game. Now go sink some Tommies! __________________ Still sailing the high seas, hunting convoys with those who join me.

09-01-09, 02:48 PM	#4
tomfon Grey Wolf Join Date: Jan 2008 Location: CK7662 Posts: 918 Downloads: 178 Uploads: 4	Thank you Graf Paper. It seems that everything is OK with the ME. I created a test mission and fired up my NYGM installation. I'll check the ME in my GWX install too just to make sure. Cheers! __________________ "I would rather have questions that can't be answered than answers which can't be questioned." - Richard P. Feynman [1918/1988] "I've missed more than 9000 shots in my career. I've lost almost 300 games. 26 times, I've been trusted to take the game winning shot and missed. I've failed over and over and over again in my life. And that is why I succeed." - Michael Jordan Mods for SH3

06-01-10, 08:35 PM	#5
Vann Watch Join Date: May 2010 Posts: 23 Downloads: 17 Uploads: 0	Whenever i start a created Spmission get duplicated units why? Hello.. HAve done all the steps in tutorials to create basic missions.. but when i start the mission ,looking for the most simple possible mission ..ie to sink a merchant ship near.problem is that when game start , instead of 1 Uboat for the player.. i get Two. and they are exactly at the same position and heading, looks like a game bug... Dont know how im doing this .. since i only place 1 submarine and 1 merchant ship in world map.. and nothing else. place the dates and parameters and trigers and objectives and events and validate with no problems. another problem is that i set the dates for merchant and Sub exactly the same.. at same hour.. and use same date/hour for parameters menu.. but when game start.. from 1942 that all was set ..the patrol begins at 1940.. when clearly i have 1942 every where in the game whenever is a start date option. i save the single missions as . misge extension as the tutorial says . using the same name as the project file. any help appreciated

06-15-10, 07:40 AM	#6
Mittelwaechter The Old Man Join Date: Apr 2007 Posts: 1,304 Downloads: 35 Uploads: 0	Hi Vann, it's some time I scripted my last mission, but let's see how far we get. Open your MIS with SH3 Mission Editor and delete your U-Boot by marking the U-Boot Icon and hitting 'DEL' key. If you have to do it twice to remove the sub you have created both subs (one over the other) by yourself. I guess you checked the multiplayer checkbox in parameters too. Now drag and drop your chosen U-Boot type into the desired location and rightclick to open properties. Check the entry dates of the unit provided by the properties screen to match your timeframe. Set a waypoint and turn your sub accordingly. Now open Mission in menubar and choose Parameters. Here you find the settings for Single- or Multiplayer - check the singleplayer box. And you find the start date settings for your mission. Check and change the data accordingly. Save the mission as normal mission as ???.mis - choose whatever name you want and make sure to insert this MIS into a folder named exactly ???. Put the ??? folder into the singlemissions folder in the games root directory. Ingame select the correct U-Boot and timeframe for your mission. Feel free to ask if something is not clear enough. __________________ 10 happy wolves rear 90 blinded, ensnared sheep. 90 happy sheep banish the wolves. Arrest the 1% - https://www.youtube.com/watch?v=dQ6hg1oNeGE

02-02-11, 01:05 PM	#7
von faust Soundman Join Date: May 2009 Location: Genova, Italy Posts: 148 Downloads: 430 Uploads: 0	Mission editor corrupt (I'm sorry, I'm using Google translator ) After enabling various MOD (GWX, FM_Interior, Magui) the mission editor is damage and appears like this: I did the same thing on laptop and it happened the same problem. I have try to disable all mods but the problem persist. Have You any idea ? Thanks

02-02-11, 01:27 PM	#8
Jimbuna Chief of the Boat Join Date: Feb 2006 Location: 250 metres below the surface Posts: 181,344 Downloads: 63 Uploads: 13	Are you running a res fix mod? Version 2 of ME is available from my FF account. __________________ Wise men speak because they have something to say; Fools because they have to say something. Oh my God, not again!! GWX3.0 Download Page - Donation/instant access to GWX (Help SubSim)

02-04-11, 01:41 PM	#11
Echolot Seasoned Skipper Join Date: Mar 2010 Location: Berlin, Germany Posts: 718 Downloads: 567 Uploads: 0	Hi. Maybe you could try this: Start Notepad. Add: ren d3d9.dll d3d9.tmp sh3missioneditor ren d3d9.tmp d3d9.dll Save to SHIII directory. Rename the new file to "MissionEditor.bat" and send to desktop (shortcut). Rename the shortcut on desktop to "MissionEditor". You can change the icon in the properties of the shortcut. Icons in SilentHunterIII/Sh3MissionEditor.exe. Run the MissionEditor with the shortcut. The small command line window you can minimze, it will disappear when you close the MissionEditor. Echolot.

01-21-13, 10:40 PM	#12
machiavelli Stowaway Posts: n/a Downloads: Uploads:	Hello, Not sure if you solved this problem, but I just figured this out just now. After doing some searching, make your AA settings to application controlled in CCC. Even AF too, if you must. But for me, I run an HD 6850 and just changing the AA to application controlled did it for me. Good luck.

07-19-16, 09:20 AM	#13
Kendras Stowaway Posts: n/a Downloads: Uploads:	Hello all, I don't know if this is the correct thread to post my question, and i'm sorry if it was not. I would like to know if my problem is just a known bug, or if it's just me doing something wrong ... So : i have created a mission with my submarine, and also a german airplane. The mission starts on January 1st, 10:30. The airplane appears the same day but at 11:00, 100 km away from my sub. I set : "evolve from entry date". But when i play the mission, the airplane doesn't spawn at all ....... What's wrong ?? Edit : if i do the same thing with a ship, the ship spawns ...

07-19-16, 04:52 PM	#14
Jimbuna Chief of the Boat Join Date: Feb 2006 Location: 250 metres below the surface Posts: 181,344 Downloads: 63 Uploads: 13	Have you set the spawning parameter at 100%? __________________ Wise men speak because they have something to say; Fools because they have to say something. Oh my God, not again!! GWX3.0 Download Page - Donation/instant access to GWX (Help SubSim)

07-19-16, 05:21 PM	#15
Jeff-Groves Village Idiot Join Date: Sep 2014 Posts: 5,321 Downloads: 130 Uploads: 0	What Aircraft and what is it's Entry date? Say your mission is set in 1940 and the entry date for the plane is 1941. The plane will not spawn. __________________ I don't do Stupid. So don't ask.