Mod from Onealex

[John Pancoast]

Originally Posted by dex

I don't know what to do anymore,set right torpedo depth(wind speed 7= 2,8 torpedo depth,mag.pistol) and too deep,waste torpedo,bb Nelson wasted....Is there anything else we need to know

If you didn't, you want to set the depth a little more than the minimum via the H.sie calculation. I.e., in your example of 2.8, set the torpedoes to 3 or slightly more not right at 2.8, and as said, early war failures come into play too.

[dex]

Originally Posted by John Pancoast

If you didn't, you want to set the depth a little more than the minimum via the H.sie calculation. I.e., in your example of 2.8, set the torpedoes to 3 or slightly more not right at 2.8, and as said, early war failures come into play too.

Believe me I try many things,simply I don't get it...only to turn off torpedo failure fix in H sie settings
Too much for early war,4 torpedo in a row at the most important moment(my set torpedo depth was from 2,8 to 4 even,nothing ,passing under keel about 2 meters)

[John Pancoast]

Originally Posted by dex

Believe me I try many things,simply I don't get it...only to turn off torpedo failure fix in H sie settings

There is a failure rate until 1942, as was the case historically. How often is this happening and are you sure it's a depth problem or could it be simply missing the target all together ?

[Onealex]

Originally Posted by dex

Believe me I try many things,simply I don't get it...only to turn off torpedo failure fix in H sie settings
Too much for early war,4 torpedo in a row at the most important moment(my set torpedo depth was from 2,8 to 4 even,nothing ,passing under keel about 2 metters)

Plenty test have been made with different torpedoes . Also I have a lot of streams on my YouTube channel. There are no bugs with dud torpedoes. As an advice in early war use TI torpedo and impact pistol.

[Texas Red]

I am having some lag issues with Onealex...

It is really weird, literally everything except the surface view in Onealex gets well over 200 fps. When I am on the bridge or viewing things on the surface, however, I get only 15-20 fps.

I have tried shutting off Vsync and changing my modlist around. But it isn't working.
Here is my modlist:
Generic Mod Enabler - v2.6.0.157
[C:\SH3\MODS]

Convoy-Routes on Map - BL!TZKR!EG Edition
Higher Air Strike Probability
Music For YouTube
Widescreen MaGui modified (1360 ? 768)
New Water (Atlantic)

And my laptop specs:
16 GBS of RAM, only 6.05 gb is available though
Intel Core i7 8th gen @1.80 ghz
Intel Graphics 620

Any ideas?

[Mad Mardigan]

Originally Posted by El Whacko

I am having some lag issues with Onealex...

It is really weird, literally everything except the surface view in Onealex gets well over 200 fps. When I am on the bridge or viewing things on the surface, however, I get only 15-20 fps.

I have tried shutting off Vsync and changing my modlist around. But it isn't working.
Here is my modlist:
Generic Mod Enabler - v2.6.0.157
[C:\SH3\MODS]

Convoy-Routes on Map - BL!TZKR!EG Edition
Higher Air Strike Probability
Music For YouTube
Widescreen MaGui modified (1360 ? 768)
New Water (Atlantic)

And my laptop specs:
16 GBS of RAM, only 6.05 gb is available though
Intel Core i7 8th gen @1.80 ghz
Intel Graphics 620

Any ideas?

LAA* = Large Address Aware (can google search for it then d/l-install it, just remember where you installed it so as to be able to find it. Me, I installed it to desktop.

Maybe see of using LAA*, with it, perhaps.. if you aren't already doing so.

Hope this info helps...

M. M.

[Texas Red]

Originally Posted by Mad Mardigan

LAA* = Large Address Aware (can google search for it then d/l-install it, just remember where you installed it so as to be able to find it. Me, I installed it to desktop.

Maybe see of using LAA*, with it, perhaps.. if you aren't already doing so.

Hope this info helps...

M. M.

Sorry, forgot to mention that I did try that too.

[dex]

Originally Posted by John Pancoast

There is a failure rate until 1942, as was the case historically. How often is this happening and are you sure it's a depth problem or could it be simply missing the target all together ?

John my friend greetings,thank you for reply and sorry because my english maybe is little bad(don t wanna use translator)....
I use automatic targeting and because off that is strange to me,what will happen if I use manual,I will not hit anything,my realisam gameplay is 40 - 50 percent.I want to say that is hard to score precisehit even with auto tdc
Sometimes in mission torpedo listening to me,proper settings,hit couple loane merchant ships,shoot down few Fairey Swordfish with flack gun.....

[dex]

Originally Posted by El Whacko

Sorry, forgot to mention that I did try that too.

Greetings
I think you must have available at least 8-16gb memory
Mod is really great,good graphics

[John Pancoast]

Originally Posted by dex

John my friend greetings,thank you for reply and sorry because my english maybe is little bad(don t wanna use translator)....
I use automatic targeting and because off that is strange to me,what will happen if I use manual,I will not hit anything,my realisam gameplay is 40 - 50 percent.I want to say that is hard to score precisehit even with auto tdc
Sometimes in mission torpedo listening to me,proper settings,hit couple loane merchant ships,shoot down few Fairey Swordfish with flack gun.....

Your English is very good, no problems. Ok, missing is not the problem. If you haven't already, try Alex's suggestion of using contact pistols vs. magnetic. They're more reliable and historically the u-boats were ordered to stop using magnetic pistols at one point anyway.
You can also edit the failure rate of magnetic pistols in H.sie's patch if desired. Look for the file named hsie.ini in your main game install folder.
Hope things are well in that beautiful part of the world !

[dex]

Originally Posted by John Pancoast

Your English is very good, no problems. Ok, missing is not the problem. If you haven't already, try Alex's suggestion of using contact pistols vs. magnetic. They're more reliable and historically the u-boats were ordered to stop using magnetic pistols at one point anyway.
You can also edit the failure rate of magnetic pistols in H.sie's patch if desired. Look for the file named hsie.ini in your main game install folder.
Hope things are well in that beautiful part of the world !

I will listen OneAlex offcourse,He doing very good job in modding,bring us players other nicer side of Sh3....
I will wait for a while in my mission(Invasion of Norway right now) set torpedo,don t engage large convoy until torpedoes become better,maybe T3 torp.is solution...I will try my best

[ivanov.ruslan]

Strangely, i had no problems with torpedoes in 1942 with automatic targeting

[dex]

Originally Posted by ivanov.ruslan

Strangely, i had no problems with torpedoes in 1942 with automatic targeting

I talk about period from 1939-1942
in 1942 is much easy,less dud,premature explosion....greetings

[dex]

torpedo depth for T1 impact pistol,is it same as for magnetic pistol(wind speed=torpedo depth)

[Onealex]

Originally Posted by dex

torpedo depth for T1 impact pistol,is it same as for magnetic pistol(wind speed=torpedo depth)

Yes. The safe torpedo depth depends on wind speed