SUBSIM Radio Room Forums



SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997

Go Back   SUBSIM Radio Room Forums > Silent Hunter 3 - 4 - 5 > SH4 Mods Workshop
Forget password? Reset here

Reply
 
Thread Tools Display Modes
Old 06-23-20, 07:39 AM   #1381
XenonSurf
Sea Lord
 
Join Date: Apr 2008
Location: Germany, Italy
Posts: 1,708
Downloads: 107
Uploads: 4
Default

Quote:
Originally Posted by propbeanie View Post

I do not know of a way to correct the gauges in the Save folder. I am wondering how you were given a mission based upon a Contact Report when you still had an outstanding Primary or Secondary mission. The internal logic in the Contact Report should not have allowed that. I'll have to download your Traffic and Contact Reports Like Stock and eyeball that. Double-check on your end also, and make certain that you have that set-up correctly...



No, it didn't happen like that. I was not given a mission in the first place to engage a Contact Report, I detected a task force by sonar, then at some point I have used the ship icon in the mission order's page to send a report, then I got a radio message telling me "order to cause serious damage to the task force" which I failed. This could have happened without my campaign mod so I don't think it's related. (BTW the stucked needles happened later in a neutral saving situation).

What I missed to say: I always save the game in a neutral situation only, never when I'm underwater or with enemies detected on the map. I could probably do both without harming the game but in this career I did never do it for sure.



XS

Last edited by XenonSurf; 06-23-20 at 07:48 AM.
XenonSurf is offline   Reply With Quote
Old 06-23-20, 08:19 AM   #1382
propbeanie
CTD - it's not just a job
 
propbeanie's Avatar
 
Join Date: May 2016
Location: One hour from Music City USA!
Posts: 9,911
Downloads: 444
Uploads: 2


Default

Eh, I have it backwards anyway... but that is a Contact Report you send by clicking on the Ship Icon. It then goes through the DynamicMiss.cfg file for routing to the DynmamicMiss folder, and its "ContactReport XX" folders and files, of which you either got 31 or 05 for the "Damage Task Force", same wording in both, only dependent upon what ship(s) were identified... It is the Status Report that you are limited by to having to complete the assigned Objectives before being given another... I'm still digging though. I'm like the kids when they were six and eight, digging holes all over the backyard, whether for buried treasure, or to bury treasure, or worm hunting to go fishing... they never filled them back in either... but I have like four holes open right now... lol - and all I've found thus far is grubs... and they bite!
__________________

"...and bollocks to the naysayers" - Jimbuna
propbeanie is offline   Reply With Quote
Old 06-23-20, 09:57 AM   #1383
XenonSurf
Sea Lord
 
Join Date: Apr 2008
Location: Germany, Italy
Posts: 1,708
Downloads: 107
Uploads: 4
Default

Quote:
Originally Posted by propbeanie View Post
Eh, I have it backwards anyway... but that is a Contact Report you send by clicking on the Ship Icon. It then goes through the DynamicMiss.cfg file for routing to the DynmamicMiss folder, and its "ContactReport XX" folders and files, of which you either got 31 or 05 for the "Damage Task Force", same wording in both, only dependent upon what ship(s) were identified... It is the Status Report that you are limited by to having to complete the assigned Objectives before being given another... I'm still digging though. I'm like the kids when they were six and eight, digging holes all over the backyard, whether for buried treasure, or to bury treasure, or worm hunting to go fishing... they never filled them back in either... but I have like four holes open right now... lol - and all I've found thus far is grubs... and they bite!

No need to get bited here hehe... I think that the 'stucked needles' will more help you when another player is reporting this in another situation. For me resolving it is quite simple: I reload the last save where the needles are ok, and I don't have to go terribly back in time because I did a lot of saving.
What can help you maybe is this: I remember that when I load the TMO mod, all secondary needles play 'crazy' going up and down and there are background sounds of them that can be heard, I don't think this is intentional (with secondary needles I mean those which show engine pressure data or such, those gauges for decor whcih there are plenty of them). The reason why they play 'crazy' may be the same as the stucked needles in my case, although I cannot judge this, it's just an idea.


Then for my additional campaign mod: this one will not play-out differently than FOTRSU 1.1 as for the mission mechanics, only thing I have changed in the campaign files is the group spawn probability, the contact report probability and the report delay time (which is expressed in the ReportPosMin=xxxx) and that's it, nothing else. The consequence of this will be that you see more neutral or enemy icons appearing on the map with or without a report sent to you about these icons; I have increased all probabilities and reduced the 'report delay time' and all this can also influence wether these icons get their positions updated on the NavMap in rare cases. As you can see, I did not change any of the mechanics for the mission objectives or such. For my problem here, you can safely ignore the fact that I'm playing with this additional mod.



XS

Last edited by XenonSurf; 06-23-20 at 10:28 AM.
XenonSurf is offline   Reply With Quote
Old 06-23-20, 11:14 AM   #1384
Havan_IronOak
Navy Dude
 
Join Date: Dec 2014
Location: St. Petersburg, FL
Posts: 175
Downloads: 233
Uploads: 0
Default

Thanks for the additional info on the Focus mode on the SJ Radar. I'll give that a try.



On the "kvetch of the day" front, is there a secret to getting good reliable saves? Should one pause the game before saving? How long should you linger on the menu screen after the save before exiting to windows?



For the second night in a row now my last saves of the night have been bad.

In fact this morning I had to go back to the -3 generation to get one that would load.



It had me musing that perhaps the splash screen just before returning control to the player shouldn't say "No mission too difficult." Apparently loading a game from a save sometimes is...


Last night I thought I was being pretty careful. I actually made 2 saves before I shut down. Both were done when the game was running at 1x speed no compression and I waited for about a minute after completing the save to exit to windows.



I'm guessing that this isn't really a problem that in any way caused by the mod, but since I bugged y'all with it before, I thought I'd post my question here.
__________________
If I can't be a good example, I'll be a glaring warning!
AMD Ryzen 7 2700X Eight-Core Processor, 3700 Mhz, 8 Core(s), 16 Logical Processor(s)
Windows 10 Home
Installed Physical Memory (RAM) 16.0 GB
NVidia RTX2070 16 Gig
Havan_IronOak is offline   Reply With Quote
Old 06-23-20, 11:24 AM   #1385
KaleunMarco
Silent Hunter
 
KaleunMarco's Avatar
 
Join Date: Sep 2007
Location: Gone to Texas. No More Kleptocratic Government for me!
Posts: 4,080
Downloads: 440
Uploads: 28


Default

Quote:
Originally Posted by Havan_IronOak View Post
Thanks for the additional info on the Focus mode on the SJ Radar. I'll give that a try.



On the "kvetch of the day" front, is there a secret to getting good reliable saves? Should one pause the game before saving? How long should you linger on the menu screen after the save before exiting to windows?



For the second night in a row now my last saves of the night have been bad.

In fact this morning I had to go back to the -3 generation to get one that would load.



It had me musing that perhaps the splash screen just before returning control to the player shouldn't say "No mission too difficult." Apparently loading a game from a save sometimes is...


Last night I thought I was being pretty careful. I actually made 2 saves before I shut down. Both were done when the game was running at 1x speed no compression and I waited for about a minute after completing the save to exit to windows.



I'm guessing that this isn't really a problem that in any way caused by the mod, but since I bugged y'all with it before, I thought I'd post my question here.
yes, you are having an interesting and unique experience.
can you post your mod set using JGSME-Task-Export Mods-Copy-to-clipboard?
__________________
there are only two things in the world: submarines and targets.
Fortis et stabilis et fidelis, semper


------------------------------------------------------------
Silent Hunter 4 1.5 Gold Edition on CDROM
LAA enabled
Dell XPS with 32 GB Ram running Win10
KaleunMarco is offline   Reply With Quote
Old 06-23-20, 12:40 PM   #1386
DanielCoffey
Planesman
 
Join Date: May 2020
Location: South Ayrshire, UK
Posts: 199
Downloads: 5
Uploads: 0
Default

Bug Report : Model defect on several Liners - missing cables.

If you look at the following Liners in S3D (or any modelling tool) you will notice that there are some missing cables on the rear mast. This is because these Liners all share the same Object for their rear mast.

NPL_Hap
NPL_Hikawa
NPL_Horai

The NPL_RC is also affected but is a re-skin of the NPL_Hap.

The cables should run from the starboard (right) side of the mast down to the deck in the same way that the port (left) ones do.

__________________
Caselabs S8 : Intel i7-7700K 4.5GHz / 32Gb DDR4 3000 / Asus 1080 Ti / Samsung 960PRO 1Tb / Dell U2715H 27" 2560x1440 / Corsair AX1200i / APC SMT1500I / Windows 10 PRO
DanielCoffey is offline   Reply With Quote
Old 06-23-20, 12:43 PM   #1387
mikesn9
Sonar Guy
 
Join Date: Feb 2013
Location: Sarasota Florida
Posts: 391
Downloads: 68
Uploads: 0
Default Surface ship with decks awash

The basics: FOTRSU with patch 1.1, mission from pearl started May 3, 1942, Tambor.
Returning to pearl, June 6 1942, almost there when Sonar man says a merchant moving slow (stopped actually).

I looked at it, it was a Whale Factory American flagged sitting there about 6 1/2 to 7 miles SW of pearl with decks under water, superstructures above.
Approximate location from the map coordinates 158,1 W 21,17(and a half) N


I hope this was enough info to nail it down.
__________________


I spent the cold war under water.
mikesn9 is offline   Reply With Quote
Old 06-23-20, 04:31 PM   #1388
Havan_IronOak
Navy Dude
 
Join Date: Dec 2014
Location: St. Petersburg, FL
Posts: 175
Downloads: 233
Uploads: 0
Default

Quote:
Originally Posted by KaleunMarco View Post
yes, you are having an interesting and unique experience.
can you post your mod set using JGSME-Task-Export Mods-Copy-to-clipboard?
Generic Mod Enabler - v2.6.0.157
[C:\Program Files (x86)\Steam\steamapps\common\Silent Hunters Wolves of the Pacific\MODS]

100_FalloftheRisingSun_UltimateEdition_v1.1_EN
252_D3D9_AntiLag
399_Same-Sized_HUD_Dials
NewPatObjs2
Captain Midnights CBS NEWS Sound Mod
KGMB
RSM1.2

Yes, I've been warned about the problems with having my game files in the [C:\Program Files (x86)\Steam\steamapps\common\ directory.

And I'll understand if that "invalidates my warranty" as to help from the folks at subsim but I've seen similar warnings on a number of different games and have never seen a problem that can be traced directly to the location of my files in this, "the Bermuda Triangle" of directories.

For what it's worth... I don't believe that this problem is related to that either as saved games are actually stored in C:\Users\*username*\Documents\SH4\Data

Thanks for any help either way.

I AM a bit surprised that my game does have lags from time to time given the horsepower that I have, and the SSD drive where both my game files and my save files are. From time to time I have tried running SH4 with task manager running in another background window trying to use alt tab to quickly catch a culprit when I do experience a slowdown, but of course that doesn't always work.
__________________
If I can't be a good example, I'll be a glaring warning!
AMD Ryzen 7 2700X Eight-Core Processor, 3700 Mhz, 8 Core(s), 16 Logical Processor(s)
Windows 10 Home
Installed Physical Memory (RAM) 16.0 GB
NVidia RTX2070 16 Gig
Havan_IronOak is offline   Reply With Quote
Old 06-23-20, 09:03 PM   #1389
Mios 4Me
Sonar Guy
 
Join Date: Feb 2019
Posts: 394
Downloads: 38
Uploads: 0


Default

Quote:
Originally Posted by propbeanie View Post
The possibility exists that the bad, original "upgrade" may have polluted the Save folder...
I think that's the case. Is it as simple as deleting the contents of the SaveGames and RichSavedGames folders?

Last edited by Mios 4Me; 06-23-20 at 09:19 PM. Reason: changed subject
Mios 4Me is offline   Reply With Quote
Old 06-24-20, 07:13 AM   #1390
propbeanie
CTD - it's not just a job
 
propbeanie's Avatar
 
Join Date: May 2016
Location: One hour from Music City USA!
Posts: 9,911
Downloads: 444
Uploads: 2


Default

First of all, you guys do realize that most of what I post is done tic (Tongue In Cheek), right? So everything is done with a grain of salt. We are trying for having the best SH4 mod, but this is still a work-in-progress of course. At least, we hope it's a "progress"...

Quote:
Originally Posted by XenonSurf View Post
No need to get bited here hehe... I think that the 'stucked needles' will more help you when another player is reporting this in another situation. For me resolving it is quite simple: I reload the last save where the needles are ok, and I don't have to go terribly back in time because I did a lot of saving.
What can help you maybe is this: I remember that when I load the TMO mod, all secondary needles play 'crazy' going up and down and there are background sounds of them that can be heard, I don't think this is intentional (with secondary needles I mean those which show engine pressure data or such, those gauges for decor whcih there are plenty of them). The reason why they play 'crazy' may be the same as the stucked needles in my case, although I cannot judge this, it's just an idea.
Then for my additional campaign mod: this one will not play-out differently than FOTRSU 1.1 as for the mission mechanics, only thing I have changed in the campaign files is the group spawn probability, the contact report probability and the report delay time (which is expressed in the ReportPosMin=xxxx) and that's it, nothing else. The consequence of this will be that you see more neutral or enemy icons appearing on the map with or without a report sent to you about these icons; I have increased all probabilities and reduced the 'report delay time' and all this can also influence wether these icons get their positions updated on the NavMap in rare cases. As you can see, I did not change any of the mechanics for the mission objectives or such. For my problem here, you can safely ignore the fact that I'm playing with this additional mod.
The "needles issue" has been around since day one of the game. The main cause used to be AI submarines in the scene with the player's submarine. The issue being ID conflicts, in that both submarines were trying to access the same equipment from the game files. s7rikeback and CapnScurvy did a LOT of work to eliminate most of those conflicts. We do occasionally find the stray conflict, but we haven't found one for quite some time now. The second most common way for gauge issues, as well as other inexplicable anomalies is bad Save data, which can come from anything that is not 100% copacetic in the game files or data currently running, which is why I suggested double (triple? quadruple?) -checking your changes. One little bit of invalid data - of which, surprisingly, a multi-spawn group is not??? it's only a bandwidth eater - but just a little something simple being "off", and you have issues. See below:


Quote:
Originally Posted by Havan_IronOak View Post
Thanks for the additional info on the Focus mode on the SJ Radar. I'll give that a try.

On the "kvetch of the day" front, is there a secret to getting good reliable saves? Should one pause the game before saving? How long should you linger on the menu screen after the save before exiting to windows?

For the second night in a row now my last saves of the night have been bad.

In fact this morning I had to go back to the -3 generation to get one that would load.

It had me musing that perhaps the splash screen just before returning control to the player shouldn't say "No mission too difficult." Apparently loading a game from a save sometimes is...

Last night I thought I was being pretty careful. I actually made 2 saves before I shut down. Both were done when the game was running at 1x speed no compression and I waited for about a minute after completing the save to exit to windows.

I'm guessing that this isn't really a problem that in any way caused by the mod, but since I bugged y'all with it before, I thought I'd post my question here.
100% "Reliable" Saves are unfortunately not going to happen in this game. All you can do is reduce your chances of encountering them. In SH3, if you were submerged at the time of a Save, when you came back in, your submarine started losing "height", or gaining depth, such that your boat was eventually crushed. No way to stop it, no way to control the submarine. Game Over... At least, that was eliminated by v1.2 of SH4... v1.3 increased the number of good Saves, and v1.4 probably made it the most stable. There is all sorts of "superstition" about the best way to Save, but the biggest is to have good data surrounding you (somehow). No damage to your boat, no injured crew, not near land (just in case the Load drops you in shallow water), it's probably still best to be on the surface, which means "at night", nothing going on around you, and at 1xTC. However, I have gotten good Saves with a full-scale naval battle going on above me, and me at 300+ on Silent Running with 3 DD chasing me, and my boat had damage, and I had injured crew. It Loaded just fine. Other times, it was all quiet, on the suface, etc., and I could not get it to load. Who knows. Another aspect of the Save of course, is the player's computer. Are you writing to a fast hard drive with lots of un-fragmented space? Is the Windows cache on a different drive from the game and the Save folder? My Save folder is on the same drive as my game, but I had a very difficult time replicating bad Save issues before, when it was the airplanes causing issues, just due to the fact that I was not encountering the same airplanes as those that had the Save issue. Some of those same players had issues with the needles in their submarines going wonky, and this is why it is imperative to get good reports with as much detail as is possible. There might still be a wonky airplane, or a recalcitrant ship that just will not cooperate with us...


Quote:
Originally Posted by DanielCoffey View Post
Bug Report : Model defect on several Liners - missing cables.

If you look at the following Liners in S3D (or any modelling tool) you will notice that there are some missing cables on the rear mast. This is because these Liners all share the same Object for their rear mast.

NPL_Hap
NPL_Hikawa
NPL_Horai

The NPL_RC is also affected but is a re-skin of the NPL_Hap.

The cables should run from the starboard (right) side of the mast down to the deck in the same way that the port (left) ones do.
Thanks for that, duly noted, and we'll try to get to that for the next release!


Quote:
Originally Posted by mikesn9 View Post
The basics: FOTRSU with patch 1.1, mission from pearl started May 3, 1942, Tambor.
Returning to pearl, June 6 1942, almost there when Sonar man says a merchant moving slow (stopped actually).

I looked at it, it was a Whale Factory American flagged sitting there about 6 1/2 to 7 miles SW of pearl with decks under water, superstructures above.
Approximate location from the map coordinates 158,1 W 21,17(and a half) N

I hope this was enough info to nail it down.
Thanks. We'll look, but had you encountered any inclement weather just before that? Encounter any IJN surface vessels (including submarines) or airplanes? Remember that June 6, 1942 was kind of an important date in Pacific during WWII...


Quote:
Originally Posted by Havan_IronOak View Post
Generic Mod Enabler - v2.6.0.157
[C:\Program Files (x86)\Steam\steamapps\common\Silent Hunters Wolves of the Pacific\MODS]

100_FalloftheRisingSun_UltimateEdition_v1.1_EN
252_D3D9_AntiLag
399_Same-Sized_HUD_Dials
NewPatObjs2
Captain Midnights CBS NEWS Sound Mod
KGMB
RSM1.2

Yes, I've been warned about the problems with having my game files in the [C:\Program Files (x86)\Steam\steamapps\common\ directory.

And I'll understand if that "invalidates my warranty" as to help from the folks at subsim but I've seen similar warnings on a number of different games and have never seen a problem that can be traced directly to the location of my files in this, "the Bermuda Triangle" of directories.

For what it's worth... I don't believe that this problem is related to that either as saved games are actually stored in C:\Users\*username*\Documents\SH4\Data

Thanks for any help either way.

I AM a bit surprised that my game does have lags from time to time given the horsepower that I have, and the SSD drive where both my game files and my save files are. From time to time I have tried running SH4 with task manager running in another background window trying to use alt tab to quickly catch a culprit when I do experience a slowdown, but of course that doesn't always work.
First of all, with RSM, is that the Radio Station Manager? If so, it is OK. Secondly, I don't know what KGMB is, nor NewPatObjs2. Was NewPatObjs2 an interim set of files I had made? Captain Midnights CBS NEWS Sound Mod is fine, so long as you fixed the date issue in it (with RSM??).

You may not notice what Windows does behind the scenes with your mod activations with JSGME. It fully depends upon your UAC (User Access Controls), as well as a few other Windows settings, as to how much "authority" you actually have on your computer. The Program Files folders are "protected system area", and as such, if an application is not "authorized" to make changes, Windows will roll them back, based upon their extensions, such as cfg and ini. Most of the graphics files are left alone, since they can do no harm. Neither Silent Hunter nor JSGME are "authorized", since they are "legacy" apps, built to the Windows XP GUI, and not to Vista or later. But it does depend upon the computer's configuration. Either way though, it is indeed the "'Bermuda Triangle' of directories". It is recommended to NOT use a Program Files directory, even for Steam games, but rather (with Steam) a second Library folder on a different hard drive, or alternate location not in a Program Files folder...

As for "glitches" and "slow downs" in the game, Windows does not respect the User, nor any "Legacy" apps or hardware you may have attached to your computer. Even "modern" software is not respected by the OS. Especially Windows 10, the OS will do whatever it wants, whenever it wants, user be #@%&!#... plain and simple. So if MS decides you need to have a new Start Image for the Windows desktop in the middle of your playing SH4, it will access the internet and download it. If Windows decides that it is time to look at the Windows Update server, it will, whether you have a "schedule" set or not. If the Indexing Service decides that it needs to find all instances of the the letter "A" in file names, it will. Most of these things can be turned off by the User, but Windows can and will turn them back on when IT decides to... Also, the game only has so much bandwidth, and writes especially, but also reads to the hard drive can cause hitches in performance. I would say that most of the really noticeable stuff is the OS, while the little hitches when at higher TC are the game.

btw, "No warranty, whether real or imagined, is implied nor activated by use of FotRSU or its derivatives. The User accepts any and all harm and or damage done to their psyche, whether from loss of personal time while playing or modding, the sinking of their submarine by game assets, real or imagined, or loss of Save folder data for any reason..."


Quote:
Originally Posted by Mios 4Me View Post
I think that's the case. Is it as simple as deleting the contents of the SaveGames and RichSavedGames folders?
Just those folders? No, unfortunately. The Save folder has a couple of files that are "bit counters", and removing a Save folder without all of its associated files can trash the whole folder the rest of the way. This is why you have to delete Saves from the game's Save menu, so that the game can remove them... It might clear itself anyway by your 2nd patrol after January 10, 1945 - but I do not know for certain. I have found a couple of suspects for the issues, and they are date-related, but I do not know for certain about their effect on the game. Only some experimenting will tell. For whatever reason, the game has a penchant to issue "assets" early to the player, from sonar, radar, and guns, to new subs to command - but have you ever seen an 'early' conning tower? much less a new one later on? Very hard to come by... inexplicable (there's that word again!)...
__________________

"...and bollocks to the naysayers" - Jimbuna

Last edited by propbeanie; 06-24-20 at 07:24 AM. Reason: Warranty terms... lol
propbeanie is offline   Reply With Quote
Old 06-24-20, 01:00 PM   #1391
mikesn9
Sonar Guy
 
Join Date: Feb 2013
Location: Sarasota Florida
Posts: 391
Downloads: 68
Uploads: 0
Default

"Quote:
Originally Posted by mikesn9
The basics: FOTRSU with patch 1.1, mission from pearl started May 3, 1942, Tambor.
Returning to pearl, June 6 1942, almost there when Sonar man says a merchant moving slow (stopped actually).

I looked at it, it was a Whale Factory American flagged sitting there about 6 1/2 to 7 miles SW of pearl with decks under water, superstructures above.
Approximate location from the map coordinates 158,1 W 21,17(and a half) N

I hope this was enough info to nail it down.


Thanks. We'll look, but had you encountered any inclement weather just before that? Encounter any IJN surface vessels (including submarines) or airplanes? Remember that June 6, 1942 was kind of an important date in Pacific during WWII..."


Yes, I got the radio message about Midway, right after I did a quick refit on the way home.
There had been some rainy weather about 10-15 days west of pearl.
Saw 1 IJN destroyer way west of pearl, many days out. came home at TC 1536, sometimes 2048.
__________________


I spent the cold war under water.
mikesn9 is offline   Reply With Quote
Old 06-24-20, 03:45 PM   #1392
Havan_IronOak
Navy Dude
 
Join Date: Dec 2014
Location: St. Petersburg, FL
Posts: 175
Downloads: 233
Uploads: 0
Default

Quote:
Originally Posted by propbeanie View Post
First of all, you guys do realize that most of what I post is done tic (Tongue In Cheek), right?

100% "Reliable" Saves are unfortunately not going to happen in this game. All you can do is reduce your chances of encountering them. ...
Are you writing to a fast hard drive with lots of un-fragmented space? Is the Windows cache on a different drive from the game and the Save folder? ...

First of all, with RSM, is that the Radio Station Manager? If so, it is OK. Secondly, I don't know what KGMB is, nor NewPatObjs2. Was NewPatObjs2 an interim set of files I had made? Captain Midnights CBS NEWS Sound Mod is fine, so long as you fixed the date issue in it (with RSM??)...

As for "glitches" and "slow downs" in the game, Windows does not respect the User, nor any "Legacy" apps or hardware you may have attached to your computer.

btw, "No warranty, whether real or imagined, is implied nor activated by use of FotRSU or its derivatives. The User accepts any and all harm and or damage done to their psyche, whether from loss of personal time while playing or modding, the sinking of their submarine by game assets, real or imagined, or loss of Save folder data for any reason..."
...

Thanks again for the reply. No worries on the tongue in cheek thing. I tend to do the same but with some of my thinner skinned friends I've taken to using humor markup language e.g. <sarcasm> and if you need to know what that is just ask an HTML programmer</sarcasm>



RSM, is the Radio Station Manager and KGMB is a radio mod (The station out of Honolulu) NewPatObjs2 is the mod that y'all told me about to fix my issue with the No Mission Objective bug,

Today I have been making sure to be surfaced at 1TC with nothing going on for at least one of my saves before exiting SH$. I'm also an inveterate "save-scummer" meaning that i sometimes have over 100 saves that I end up deleting when I stop playing some games. (I'm at over 100 now for SH4 and that's after weeding out a bunch of the oldest) It does help though if someone wants to see additional info on any problems I report.

I tried setting the replay flag and making a second copy of the same save but that doesn't seem to work... Is that correct? Not really a problem as I tend to format my savegames as Alex T. Sinkstof 1943 03 30 0000 for a save that I make where the game date and time are part of the save name. But ya know I'm curious.

As to windows not playing nice with what you're running, that's only somewhat true.
If you know which apps do what you can close a few of the more egregious ones down before starting your game, e.g. For me it's any Firefox windows (they seem to soak up memory like a sailor does rum),

also Adobe runs a lotta stuff that I generally don't need and shutting it down doesn't hurt anything (though you might have to reboot before opening any PDFs

Finally, I set everything that asks to schedule updates to do them at 3:00AM. That keeps them outta my hair at least once a week I make sure that my machine runs through the night so as to pick up any updates that way.

I also have an SSD drive as my C: drive. That's a Solid State Drive meaning almost no lag time on reads and writes, no fragmentation delays ever (as there's no seek time delays)

The Windows cache and the save files ARE on the same drive and I've toyed with the idea of moving one or the other but that can be a problem as well.
__________________
If I can't be a good example, I'll be a glaring warning!
AMD Ryzen 7 2700X Eight-Core Processor, 3700 Mhz, 8 Core(s), 16 Logical Processor(s)
Windows 10 Home
Installed Physical Memory (RAM) 16.0 GB
NVidia RTX2070 16 Gig

Last edited by Havan_IronOak; 06-24-20 at 09:56 PM.
Havan_IronOak is offline   Reply With Quote
Old 06-24-20, 05:14 PM   #1393
Moonlight
Admiral
 
Join Date: Dec 2010
Location: Fookhall Copse
Posts: 2,377
Downloads: 184
Uploads: 0


Default Chinese takeaway

I'll have a Number 9 a Number 11 and a Number 17 please, oh yes and a side order of a midget submarine to do the mopping up with, games turning into a joke Mr beanie. These ships and boat were searching for me NNE of Hachiio Jima, the destroyer type ships I can understand but, a bloody midget submarine is taking the game to Hollywood movie level old boy.

I took your advice on the thermal layer and went 56ft below it, N9 and N11 passed by above to port and starboard, pinging away as though it was going to go out of fashion they were, well that got the attention of N17 and he didn't play by your rules Mr beanie, as soon as he got to know about my whereabouts he was coming in for the kill. I took some damage from his side throwers but I had the common sense to hit flank and to start going deeper, if I hadn't you'd be getting a much different report, I went down to 400ft and those ships never found me again.
__________________
Moonlight is offline   Reply With Quote
Old 06-25-20, 01:53 AM   #1394
Mios 4Me
Sonar Guy
 
Join Date: Feb 2019
Posts: 394
Downloads: 38
Uploads: 0


Default

USS Cabrilla assigned to Patrol Area 4 immediately following sea trials in June 1943:

- AA crews remained merrily on station at 33 meters.

- Despite heavy seas, the skipper was determined to finish an Ada Maru by gunfire. Whenever the crew was forced back inside, toggling the key to order them back outside repeatedly resulted in an unwanted order to dive.

- No home port has yet been indicated, though we expect that to change soon.

This career was started after all contents of the Save Folder were deleted.

EDIT: After completing the assignment, we headed into Tokyo Bay on July 4th and I saved halfway up the north-south stretch of passage. Continuing on, there was a Hatsuharu firmly ashore at Yokosuka - not just on the docks, but on the ground south of them. Not sure if it had spawned there or ran itself aground at very high speed, but there was no smoke.

There was no sign of the TF that had been there the previous morning, just a burning ship aground on the point beyond, possibly a whalechaser.

When I went back to this Save point, it repeatedly failed to load, despite taking every precaution I've read about here. I went back to the previous Save, which was back in Area 4, and left station early to investigate that TF, arriving off Tokyo Bay on 6/29. Again, the TF icon was there in the morning but gone when I sneaked in.

Last edited by Mios 4Me; 06-26-20 at 12:42 AM. Reason: Tokyo Bay info
Mios 4Me is offline   Reply With Quote
Old 06-25-20, 02:35 AM   #1395
Mad Mardigan
Admiral
 
Mad Mardigan's Avatar
 
Join Date: Sep 2016
Location: Grand Rapids, Mi.
Posts: 2,327
Downloads: 491
Uploads: 0


SHO Re: Ship playing the role of Casper..???



Just out of curiosity, are ships in game, supposed to be trying out for the part of Casper the friendly ghost...???

Don't know if this is happening in career side or NOT.. but decided to try the training side of things, for dumps & giggles.. and noted a very odd incident when I did so.

In the navigation portion, tooling about in a Porpoise class boat.. sailed past a Troopship Queen Mary & literally was seeing the island.. right straight through it... I went to free roam mode, to investigate this.. and sure enough, NO matter what angle but 1.. I was able to see everything on the other side through it.

The 1 view angle that this did NOT occur.. was when I was overhead & looking at it with water backing it..or any angle that included water back behind it, to be frank.. any & all other angles.. it became see through ghost...

strange indeed... just thought I'd mention it.. dunno if this is known about... haven't seen any thing mentioned thus far...

M. M.
__________________
Mad Mardigan is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:28 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1995- 2024 Subsim®
"Subsim" is a registered trademark, all rights reserved.