[REL] Re: GWR 2020 - Page 3

Anvar1061 · 10-12-20, 03:46 AM

Quote:

Originally Posted by Randomizer

This was on a Type VIIB in 1940.

Fixed it

VIIB has a Turm 1, but in different configurations. From 19390901 without Reichsadler and from 19400311 with Wintergarden.

Both are in the Commander. This is done to change the type of deckhouse and U-boat, even if you want to start a career for type VIIA
Copy file data\Submarine\NSS_Uboat7b\NSS_Uboat7b.eqp to SH3 Commander\Date\19400311\ data\Submarine\ NSS_Uboat7b

Randomizer · 10-12-20, 10:35 AM

Thanks for the fix but GWR has stopped working again. I changed nothing in the installation or on my computer but when trying to start using SH3 Cdr or the SH3.exe directly, the loading bar gets to 95% of the way to the Main Menu screen and then it CTD with the error message "Silent Hunter has encountered a problem and needs to close".

-C

Anvar1061 · 10-12-20, 11:03 AM

Quote:

Originally Posted by Randomizer

Thanks for the fix but GWR has stopped working again.

Thank you for participating. That's what tests are for.

Anvar1061 · 10-12-20, 02:29 PM

Track fixes in post #1

Anvar1061 · 10-13-20, 02:57 AM

In the interior of 9, the CR9C_4.tga texture responsible for devices was broken.
Fixed.

all_my_loving · 10-13-20, 10:04 AM

the single mission convoy H3 caused CTD while loading into command room, one and only Campaign MEDITERRANEAN SEA is activated with JSGME.

kl43 · 10-13-20, 10:27 AM

I can't run any single missions. The rest works with variable luck. The mod is great!
greetings

CapZap1970 · 10-13-20, 10:55 AM

Anvar, the patches are supposed to be installed one on top of the other, or just the last patch (GWR-Tool-Fixes-20201013)? Have been unable to start a career so far, the only thing working 100% is the Academy. In career crashes most of the time when loading, and when it doesn't the CTD happens within 30-40 seconds after it finished loading.

What about the XXi patch and TypeIIb_U9_Ritterkreuz?

Could you please update your first post with a simple ordered list of which patches to install? Thank you!

CapZap

Anvar1061 · 10-13-20, 11:34 AM

Quote:

Originally Posted by CapZap1970

Anvar, the patches are supposed to be installed one on top of the other, or just the last patch (GWR-Tool-Fixes-20201013)?
What about the XXi patch and TypeIIb_U9_Ritterkreuz?

All patches will be updated in #1. The latter will contain all previous fixes.
Patch XXI has already been rewritten with the new GWR-Tool-Fixes-202010 **. Mod TypeIIb_U9_Ritterkreuz I recommend to use together with the Black Sea campaign.

CapZap1970 · 10-13-20, 12:00 PM

Quote:

Originally Posted by Anvar1061

All patches will be updated in #1. The latter will contain all previous fixes.
Patch XXI has already been rewritten with the new GWR-Tool-Fixes-202010 **. Mod TypeIIb_U9_Ritterkreuz I recommend to use together with the Black Sea campaign.

Got it!!

Anvar1061 · 10-13-20, 12:48 PM

Quote:

Originally Posted by all_my_loving

the single mission convoy H3 caused CTD while loading into command room, one and only Campaign MEDITERRANEAN SEA is activated with JSGME.

To play Single Missions and view the Museum to reduce loading times use the Blank campaign Mod

More screen

https://www.subsim.com/radioroom/sho...ostcount=14916

johnmarrington · 10-13-20, 04:54 PM

CTD when I start a campaign, CTD when i start a single mission, CTC when I start the museum every time

I activated the mods in the correct order and the fix by dragging the "data" from the tool fixes to my SH3 folder. I ran hsie and stiebler and updated the .exe from both. Before that i ran the tycho patch.bat. When i run sh3toolkit.exe i only get a report as follows:

Duplicate Single Entries
~~~~~~~~~~~~~~~~~~~~~~~~

EntDt Long Lat
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
19390801 -10000000.000000 7000000.000000 already exists in another entry!
19390801 1415870.000000 6905000.000000 already exists in another entry!
19390801 1739992.000000 4310943.000000 already exists in another entry!
19390801 1740170.000000 4311151.000000 already exists in another entry!
19390801 3389773.000000 7214500.000000 already exists in another entry!
19390801 3483523.000000 7205300.000000 already exists in another entry!
19400411 3386273.000000 7211400.000000 already exists in another entry!
19400411 3484173.000000 7207000.000000 already exists in another entry!
19410427 2816715.000000 4514755.000000 already exists in another entry!
19411220 3390073.000000 7218800.000000 already exists in another entry!
19411220 3482673.000000 7203950.000000 already exists in another entry!
19420215 3383273.000000 7216600.000000 already exists in another entry!
19420215 3481673.000000 7206000.000000 already exists in another entry!
19430903 3392873.000000 7211200.000000 already exists in another entry!
19430903 3484823.000000 7204600.000000 already exists in another entry!
19441218 2391371.000000 6555842.000000 already exists in another entry!
19450101 2390890.000000 6556037.000000 already exists in another entry!
19451215 -7539547.000000 1261421.000000 already exists in another entry!
19451215 -7539615.000000 1261507.000000 already exists in another entry!

SCR lines read: 410984

Total time taken: 0:00:00

___

I dont know what to do anymore. I run the .exe as admin and with windows xp (service pack2) compatibility. Plz help

Mad Mardigan · 10-13-20, 05:34 PM

At this point, have set aside attempting to add this to the virgin copy I have of SH3... My reasoning is.. understanding the correct order of doing so, is an unclear, convoluted jumble.

The original GWX, was done so, in a clear concise manner.. in that it was simplified, you clicked on the install .exe for it & away it went. LSH3, was in the same format, as GWX. CCoM users, were given a clear concise road map of install order & what to do if issues arose in installing it. (that I recall of.. to be frank, it has been some time since I used CCoM, so My recall with it may be a bit rusty...). WAC, was like CCoM, as well. NYGM, I ran into issues with understanding what to do to get that installed, to the point I just stopped even trying.

That said.. I do want to give this a fair shake.. but at this point, am just stymied as to getting everything lined up for proper install...

Am wondering, if it is possible to have the GWR, set up in a format to allow for it to update a GWX install... or to have the install do as GWX did, start an .exe command that does the install for you.. Yes, I do have some experience with file editing.. but only to a point.. beyond that, I don't feel comfortable poking around with file editing...

I really do want to give this a try, but.. as I said.. am not understanding just how to get it working...

M. M.

Anvar1061 · 10-14-20, 12:00 AM

Quote:

Originally Posted by johnmarrington

Duplicate Single Entries
Plz help

If you look closely at the Mission Editor and figure it out, you will notice that these convoys fly the same routes at different times throughout the war.
Sink them all!

Anvar1061 · 10-14-20, 12:12 AM

Quote:

Originally Posted by Mad Mardigan

I really do want to give this a try, but.. as I said.. am not understanding just how to get it working...

I hate to upset you, but you are faced with a problem similar to NYGM and are faced with the dilemma of choosing what you want.
I'm not a great teacher to explain what needs to be done. I, like a small child, read from pictures.
Using JSGME rather than installer I can always go back to SH3 stock. But if someone has ideas, I will definitely listen to them.

10-12-20, 02:29 PM	#34
Anvar1061 Ocean Warrior Join Date: May 2012 Location: In the sea, on land and above Posts: 3,395 Downloads: 860 Uploads: 0	Track fixes in post #1 __________________

10-13-20, 02:57 AM	#35
Anvar1061 Ocean Warrior Join Date: May 2012 Location: In the sea, on land and above Posts: 3,395 Downloads: 860 Uploads: 0	In the interior of 9, the CR9C_4.tga texture responsible for devices was broken. Fixed. __________________

10-13-20, 10:27 AM	#37
kl43 Nub Join Date: Apr 2013 Posts: 4 Downloads: 62 Uploads: 0	GWR I can't run any single missions. The rest works with variable luck. The mod is great! greetings

10-13-20, 10:55 AM	#38
CapZap1970 Sea Lord Join Date: Mar 2007 Location: La Paz, Bolivia Posts: 1,956 Downloads: 265 Uploads: 51	Anvar, the patches are supposed to be installed one on top of the other, or just the last patch (GWR-Tool-Fixes-20201013)? Have been unable to start a career so far, the only thing working 100% is the Academy. In career crashes most of the time when loading, and when it doesn't the CTD happens within 30-40 seconds after it finished loading. What about the XXi patch and TypeIIb_U9_Ritterkreuz? Could you please update your first post with a simple ordered list of which patches to install? Thank you! CapZap __________________

10-13-20, 04:54 PM	#42
johnmarrington Swabbie Join Date: Mar 2020 Posts: 8 Downloads: 46 Uploads: 0	CTD all the time CTD when I start a campaign, CTD when i start a single mission, CTC when I start the museum every time I activated the mods in the correct order and the fix by dragging the "data" from the tool fixes to my SH3 folder. I ran hsie and stiebler and updated the .exe from both. Before that i ran the tycho patch.bat. When i run sh3toolkit.exe i only get a report as follows: Duplicate Single Entries ~~~~~~~~~~~~~~~~~~~~~~~~ EntDt Long Lat ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~ 19390801 -10000000.000000 7000000.000000 already exists in another entry! 19390801 1415870.000000 6905000.000000 already exists in another entry! 19390801 1739992.000000 4310943.000000 already exists in another entry! 19390801 1740170.000000 4311151.000000 already exists in another entry! 19390801 3389773.000000 7214500.000000 already exists in another entry! 19390801 3483523.000000 7205300.000000 already exists in another entry! 19400411 3386273.000000 7211400.000000 already exists in another entry! 19400411 3484173.000000 7207000.000000 already exists in another entry! 19410427 2816715.000000 4514755.000000 already exists in another entry! 19411220 3390073.000000 7218800.000000 already exists in another entry! 19411220 3482673.000000 7203950.000000 already exists in another entry! 19420215 3383273.000000 7216600.000000 already exists in another entry! 19420215 3481673.000000 7206000.000000 already exists in another entry! 19430903 3392873.000000 7211200.000000 already exists in another entry! 19430903 3484823.000000 7204600.000000 already exists in another entry! 19441218 2391371.000000 6555842.000000 already exists in another entry! 19450101 2390890.000000 6556037.000000 already exists in another entry! 19451215 -7539547.000000 1261421.000000 already exists in another entry! 19451215 -7539615.000000 1261507.000000 already exists in another entry! SCR lines read: 410984 Total time taken: 0:00:00 ___ I dont know what to do anymore. I run the .exe as admin and with windows xp (service pack2) compatibility. Plz help

10-12-20, 10:35 AM	#32
Randomizer Weps Join Date: Mar 2019 Location: Vancouver Island Posts: 355 Downloads: 136 Uploads: 0	Thanks for the fix but GWR has stopped working again. I changed nothing in the installation or on my computer but when trying to start using SH3 Cdr or the SH3.exe directly, the loading bar gets to 95% of the way to the Main Menu screen and then it CTD with the error message "Silent Hunter has encountered a problem and needs to close". -C

10-13-20, 10:04 AM	#36
all_my_loving Watch Join Date: Jun 2017 Location: Taiwan Posts: 26 Downloads: 144 Uploads: 0	the single mission convoy H3 caused CTD while loading into command room, one and only Campaign MEDITERRANEAN SEA is activated with JSGME.

10-13-20, 05:34 PM	#43
Mad Mardigan Admiral Join Date: Sep 2016 Location: Grand Rapids, Mi. Posts: 2,327 Downloads: 491 Uploads: 0	Re: GWR... At this point, have set aside attempting to add this to the virgin copy I have of SH3... My reasoning is.. understanding the correct order of doing so, is an unclear, convoluted jumble. The original GWX, was done so, in a clear concise manner.. in that it was simplified, you clicked on the install .exe for it & away it went. LSH3, was in the same format, as GWX. CCoM users, were given a clear concise road map of install order & what to do if issues arose in installing it. (that I recall of.. to be frank, it has been some time since I used CCoM, so My recall with it may be a bit rusty...). WAC, was like CCoM, as well. NYGM, I ran into issues with understanding what to do to get that installed, to the point I just stopped even trying. That said.. I do want to give this a fair shake.. but at this point, am just stymied as to getting everything lined up for proper install... Am wondering, if it is possible to have the GWR, set up in a format to allow for it to update a GWX install... or to have the install do as GWX did, start an .exe command that does the install for you.. Yes, I do have some experience with file editing.. but only to a point.. beyond that, I don't feel comfortable poking around with file editing... I really do want to give this a try, but.. as I said.. am not understanding just how to get it working... M. M. __________________