SUBSIM Radio Room Forums



SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997

Go Back   SUBSIM Radio Room Forums > Current crop of subsims & naval games > Wolfpack
Forget password? Reset here

Reply
 
Thread Tools Display Modes
Old 08-17-16, 03:41 AM   #1
Onkel Neal
Born to Run Silent
 
Onkel Neal's Avatar
 
Join Date: Jan 1997
Location: Cougar Trap, Texas
Posts: 21,363
Downloads: 541
Uploads: 224


Support Question about Type VII ballast tanks

I'm researching the ballast tank system on Type VIIs to see how we will fit it in the game.

The Type VII had many tanks, including trim tanks, torpedo compensating tanks, MBT 1,2,3,4, & 5, regulatory tanks, and a pair? of negative tanks. I say pair, because they apparently wrap around the bottom of the sub? so you have a port and stbd pair of tanks for MBT 2, 4 and the negative tank that are connected beneath the boat?

The MBT 1, 3, and 5 seem to be a set of single tanks on the centerline of the sub.

The negative tank seems smaller that I would have expected.

In the pictures of the valves 1, 2, 3; they are painted black on U-995, any idea why? Are these possibly fuel lines?

The red bar handle, any idea what this does? What kind of valve it operates? It seems like a quick-opening valve of some kind.

The pair of red/blue chain-drive valves on the bulkhead, those are for the MBT 4, and another set are located on the opposite (stern) end of the control room, they open the vents for the MBT #2. That's what I think.

Any feedback or info is appreciated.
Attached Images
File Type: jpg U-570DTPlate16.jpg (99.2 KB, 133 views)
File Type: jpg U-570DTPlate5.jpg (97.6 KB, 122 views)
File Type: jpg valves123.jpg (94.0 KB, 133 views)
File Type: jpg red_bar_valve.jpg (50.2 KB, 114 views)
File Type: jpg mbt4valves.jpg (96.0 KB, 115 views)
__________________
SUBSIM - 26 Years on the Web
Onkel Neal is offline   Reply With Quote
Old 08-17-16, 04:52 AM   #2
Dowly
Lucky Jack
 
Join Date: Apr 2005
Location: Finland
Posts: 25,035
Downloads: 32
Uploads: 0


Default

Hey Neal,

Not sure if this is helpful (didn't go through it, because lazy):
Type VIIC Manual (English)
Dowly is offline   Reply With Quote
Old 08-17-16, 09:16 AM   #3
Penguin
Ocean Warrior
 
Penguin's Avatar
 
Join Date: Mar 2010
Location: Rheinische Republik
Posts: 3,322
Downloads: 92
Uploads: 0


Default

According to the 1940 regulations, wheels and handles used for quick-release vents had to be painted red, in the 1944 regulations they also allowed green.
Source: http://www.u-boot-archiv.de/dieboote/farben.html

The exact location of the handle is hard to see on the pic. As it is located on the top, it could have been used for the fersh air conduits to the diesel engine or the internal fresh/used air pipes. Those start just start aft of the observation scope - close to the air vents for dive bunker 2 and 4.
Penguin is offline   Reply With Quote
Old 08-17-16, 12:33 PM   #4
Feldpost
Watch
 
Join Date: Mar 2010
Posts: 16
Downloads: 72
Uploads: 0
Default

Quote:
Originally Posted by Onkel Neal View Post
..., and another set are located on the opposite (stern) end of the control room, they open the vents for the MBT #2. That's what I think.
I think you thought is correct, stern of the control room is MBT#2(?)

(maybe someone can help to translate )
"Handrad für die Entlüftung des Tauchbunkers 2"

Source: "Vom Original zum Modell: Uboottyp VIIC"; ISBN 3-7637-6002-4

Also take a look at 00:04:
(flood the MBT#4 ?)


Maybe this background can help too (it's not WWII but possible it was similar)

Definition for Bundesmarine submarines:


Source: "Unterseebootbau"; ISBN 3-7637-5958-1

Lenz-/Seewasser: Seawater
Kraftstoff: Fuel
Frisch-/Waschwasser: (not salty) Drinkwater
Schmieröl: oil
Lüftung: air
Druckluft: compressed air


edit: a shape of valves is given for its purpose in case of darkness

Last edited by Feldpost; 08-17-16 at 02:41 PM.
Feldpost is offline   Reply With Quote
Old 08-17-16, 12:52 PM   #5
Catfish
Dipped Squirrel Operative
 
Catfish's Avatar
 
Join Date: Sep 2001
Location: ..where the ocean meets the sky
Posts: 17,032
Downloads: 38
Uploads: 0


Default

The main ballast tank (= ballast tank #3) was located within the pressure hull beneath the control room. The two (!) negative buoyancy tanks (not two pairs) were located port and starboard in the "saddle". I do not think they were connected, and i do not know whether they "met" underneath at all.
I have some plans, but none with a section at that point.
Each negative buoyancy tank (=Untertriebszelle) had a capacity of 2,15 tons of seawater.
Will post here if i find something.


Copy from the Subsim meet thread, regarding the procedure for the neg. b. tanks:


From the "Tauchvorschrift für Unterseeboote":

Untertriebszellen

131. Bei Booten mit Untertriebszellen wird wie folgt verfahren: Die Untertriebszellen werden, wenn das Boot alarmtauchklar ist, über Wasser gefüllt gefahren, so daß dem Boot ein der Größe der Zellen entsprechender Untertrieb gegeben ist. Nach der Ausführung des Befehls „Fluten“ und merklicher Falltendenz werden die Untertriebszellen auf den Befehl des L.I. „Ausdrücken“ ausgedrückt.

(131. If the boat has negative buoyancy cells, the procedures are as follows: The U.-cells are being flooded when the boat is running surfaced, and in "ready to submerge" state (edit: alarmtauchklar=all men at diving positions, boat prepared for emergency dive - so .. usual condition in enemy waters), so that there is an appropriate negative buoyancy. After execution of the order "Fluten" (edit: flood the tanks!) and a perceptible tendency of falling, the cells are being blown out by order of the LI (Leitender Ingenieur).

Der beste Zeitpunkt des Ausdrückens für mittlere Boote ist eine Tiefe von etwa 8 bis 10 m, für große Boote eine Tiefe von 10 bis 12 m. Erfahrungsgemäß beruht die Wirkung der Untertriebszellen in erster Linie im schnelleren Durchbrechen durch die Wasseroberfläche beim Tauchen. Da die schnelle Erreichung großer Tiefen fast ausschließlich von der Lastigkeit und der Fahrtstufe abhängig ist (etwa 25 bis 30°, 2 x G.F.), ist es falsch, die Untertriebszellen auf größerer Tiefe auszudrücken, da der äußerst geringe Vorteil in keinem Verhältnis zu der Gefahr steht, in die das Boot in einem solchen Falle geraten kann. Insbesondere steigen der Luftverbrauch und die Ausdrückdauer ganz erheblich.

(The best time for the blowing ballast of boats of middle size is a depth of 8-10 meters, for big boats a depth of 10-12 meters.
From experience the essential effect of the U.-cells is one of breaking through the water surface during a dive. Because the reaching of greater depths is almost entirely dependent of angle and speed (ca. 25 to 30°, 2x all ahead) it is wrong to blow them out at greater depth, because the advantage would not be in due proportion to the danger, the boat will be in. Especially wastage of air and the time of the blowing ballast increase badly.)

132. L.I.: „Ausdrücken“.

Daraufhin wird das Ventil „Ausdrücken Untertriebszellen“ aufgerissen und mit höchstmöglichem Druck (20 bis 30 at) ausgedrückt. [...]


(132. LI: "Blow ballast".
With this order the "Blow U.-cell" valve will be torn open, and be blown out by the utmost pressure (20-30 at). [...]

The general procedure was to have the U.-cells being fully blown at 19 meters of depth.
__________________


>^..^<*)))>{ All generalizations are wrong.
Catfish is offline   Reply With Quote
Old 08-17-16, 01:13 PM   #6
Catfish
Dipped Squirrel Operative
 
Catfish's Avatar
 
Join Date: Sep 2001
Location: ..where the ocean meets the sky
Posts: 17,032
Downloads: 38
Uploads: 0


Default

Anyone here has those three books from Lothar-Guenther Buchheim?
I mean those picture-books:
"Die U-Boot Fahrer"
"U-Boot Krieg"
"Zu Tode gesiegt"
Lots of pictures with explanations what can be seen on it, however not all.
If i find something about those trimming tanks..
__________________


>^..^<*)))>{ All generalizations are wrong.
Catfish is offline   Reply With Quote
Old 08-17-16, 01:22 PM   #7
Feldpost
Watch
 
Join Date: Mar 2010
Posts: 16
Downloads: 72
Uploads: 0
Default

Quote:
Originally Posted by Onkel Neal View Post
...In the pictures of the valves 1, 2, 3; they are painted black on U-995, any idea why? Are these possibly fuel lines?
(Assumption) From the shape and location i don't think these are fuel lines. That close to the conning tower and 'shaped' like air valves these could be valves for fresh air into the different compartments of the sub(?).


Quote:
Originally Posted by Onkel Neal View Post
...
The red bar handle, any idea what this does? What kind of valve it operates? It seems like a quick-opening valve of some kind.
(Assumption) Quick 'Entlüftung der Tauchzelle #3' (flooding of cell #3); or more likely the 'Untertriebszelle' (for quick alarm diving)?
Where is it located? - Stern / port of command room? - On the far left of the picture the vertical-scale (could be a kind of fill/pressure-indicator for a cell), could be a hint too (but when stern/port than these could be an indicator for MBT#2)...

Last edited by Feldpost; 08-17-16 at 01:37 PM.
Feldpost is offline   Reply With Quote
Old 08-17-16, 01:32 PM   #8
Feldpost
Watch
 
Join Date: Mar 2010
Posts: 16
Downloads: 72
Uploads: 0
Default

Quote:
Originally Posted by Catfish View Post
Anyone here has those three books from Lothar-Guenther Buchheim?
I mean those picture-books:
"Die U-Boot Fahrer"
"U-Boot Krieg"
"Zu Tode gesiegt"
Lots of pictures with explanations what can be seen on it, however not all.
If i find something about those trimming tanks..
I just ran mad before my first post here since i got two Guenther Buchheim pictures-books and can't find them... but as i remember there are not that technical detailed but they would be great as source for graphical atmosphere impressions for 'Wolfpack'
Feldpost is offline   Reply With Quote
Old 08-17-16, 01:46 PM   #9
Catfish
Dipped Squirrel Operative
 
Catfish's Avatar
 
Join Date: Sep 2001
Location: ..where the ocean meets the sky
Posts: 17,032
Downloads: 38
Uploads: 0


Default

Regarding the last of the 5 pictures, the two handwheels over the fore bulkhead of the control room, Buchheim writes on page 47 of his book "Die U-Boot Fahrer" that these are for the "ventilation of the two saddle tanks in the boat's center". Since there are only two exterior (saddle) tanks at the center those can be either the control wheels for the two (aft) trim tanks, or for the two (fore) negative buoyancy tanks.

What does "ventilation" mean here, Bucheim writes "Entlueftung". Is this for letting pressure air into the tank for "ventilation"? Or is it for flooding, opening the upper valves?
__________________


>^..^<*)))>{ All generalizations are wrong.
Catfish is offline   Reply With Quote
Old 08-17-16, 02:05 PM   #10
Feldpost
Watch
 
Join Date: Mar 2010
Posts: 16
Downloads: 72
Uploads: 0
Default

Quote:
Originally Posted by Onkel Neal View Post
...The negative tank seems smaller that I would have expected.
What i red; were the negative-tanks (Untertriebszelle? - about 2x2m²) an aid to get the boat in stronger sea under the water line (assist to flood the main-cells especially in heavy waves from stern). I am sure there were also used for alarm-diving, but they have to been blown-free with compressed air as soon the destination depth was reached... (Source: "Unterseebootbau" page 26)
Feldpost is offline   Reply With Quote
Old 08-17-16, 02:07 PM   #11
Feldpost
Watch
 
Join Date: Mar 2010
Posts: 16
Downloads: 72
Uploads: 0
Default

Quote:
Originally Posted by Catfish View Post
...Bucheim writes "Entlueftung". Is this for letting pressure air into the tank for "ventilation"? Or is it for flooding, opening the upper valves?
"Entlüftung" means to let the air out = flooding = opening the upper valves, nice find

edit:
"ventilation of the two saddle tanks in the boat's center" => MBT #4 (Tauchbunker 4) are actualy two, port and stb. and are close to the center (slightly ahead)... i don't think that Bucheim ment a negative or trimm tank, these are the forward main-ballast tanks (?)...

Last edited by Feldpost; 08-17-16 at 02:25 PM.
Feldpost is offline   Reply With Quote
Old 08-17-16, 02:34 PM   #12
THE_MASK
Ace of the deep .
 
THE_MASK's Avatar
 
Join Date: Jan 2006
Posts: 9,226
Downloads: 901
Uploads: 73


Default

Just a thought . Playing multiplayer single missions for 1 to 2 hours .
Is this turning into Neals Trimming Tanks simulator ?
THE_MASK is offline   Reply With Quote
Old 08-17-16, 02:52 PM   #13
Catfish
Dipped Squirrel Operative
 
Catfish's Avatar
 
Join Date: Sep 2001
Location: ..where the ocean meets the sky
Posts: 17,032
Downloads: 38
Uploads: 0


Default

This may also help:
http://www.uboatarchive.net/U-570/U-570DesignBook.htm

Greetings,
CF
__________________


>^..^<*)))>{ All generalizations are wrong.
Catfish is offline   Reply With Quote
Old 08-17-16, 03:03 PM   #14
Penguin
Ocean Warrior
 
Penguin's Avatar
 
Join Date: Mar 2010
Location: Rheinische Republik
Posts: 3,322
Downloads: 92
Uploads: 0


Default

Well, I just uploaded some pics for all you tank and cell geeks.
(I hope imgur doesn't screw up the quality, each scan is about 8Mb in size)

Pic 1 shows where the valves for the diving tank 2 and 4 are located (Entlüftungsventil Tauchbunker 2 + 4, bb = port) - you see a corresponding valve on the starboard side, too.

Pic 2 shows the location of all central-located tanks

Pic 3 shows shows that my previous assumption about the air pipe to the Diesel engine was wrong - you can see the pipe only branches to the engine room and the kitchen.

All drawings depict a 1944 type VII C
Source: Eberhard Rössler: Geschichte des deutschen U-Bootbaus, Band 1 - isbn: 3-86047-153-8
Penguin is offline   Reply With Quote
Old 08-17-16, 03:13 PM   #15
Feldpost
Watch
 
Join Date: Mar 2010
Posts: 16
Downloads: 72
Uploads: 0
Default

Quote:
Originally Posted by sober View Post
Just a thought . Playing multiplayer single missions for 1 to 2 hours .
Is this turning into Neals Trimming Tanks simulator ?

[OFFTOPIC]
Maybe the swedes including Neal are creating the first UBoot game which can be labeled as Submarine Simulation
A submarine is nothing else than an underwater plane and good trimming is a fundemental in every flight-sim... from 'Silent Service' (C64) until SH5 we only got 'tactical' simulation of submarines, but 'Wolfpack' can also get the first submarine-simulation...

When the team thinks, get that stuff early in development into the core engine b/c it could be needed someday

I am sure there will be realism-settings later for just go and keep periscope depth, but to get a game-engine which also allows you to play the LI and try to keep periscope depth at BFT9 in north atlantic while the boss ordered to keep silent as possible
[/OFFTOPIC]
Feldpost is offline   Reply With Quote
Reply

Tags
ballast, tanks, valves


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:15 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1995- 2024 Subsim®
"Subsim" is a registered trademark, all rights reserved.