![]() |
SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997 |
|
![]() |
#1 |
Sailor man
![]() Join Date: Jul 2014
Posts: 43
Downloads: 4
Uploads: 0
|
![]()
Hi Everyone!
I noticed that in Silent Hunter the telemeters on German periscopes seem to be marked in degrees just like the American ones. At least, the scale seems to match the Stadimeter reading in degrees, and a manual calculation, assuming the ticks are degrees, gives good range. At the same time, some other sims, like, say, Wolfpack, seem to have those scales in centiradians. That means, on low magnification, number 10 corresponds to 5.7 degrees. This actually makes a lot of sense for metric units, as then the calculation of range in hectometers becomes super easy indeed. Further, historical things, like RAOBF, seem to function in centiradians. So, my question is, which scale is historically accurate? Are there any mods producing the correct scale in Silent Hunter? Also, what are the correct magnification powers for the periscopes? I thought they should both be 1.5X and 6X. Yet in Silent Hunter the observation scope shows 1 and 4. Is this actually the case? Or is it just a typo on the indicator? |
![]() |
![]() |
![]() |
#2 | |
Grey Wolf
![]() |
![]() Quote:
Real ones were in milliradians on the vertical, degrees on the horizontal. Both attack scope (at least the C/2 Stand-Sehrohr, the one you sit at and operate with pedals in the tower) and the control room “observation” scope were 1.5x and 6x. The sight picture through the attack scope can be seen here, drawing 17: http://www.tvre.org/en/aiming-with-the-periscope Hitman’s optics are imo the best representation of historical scopes. Additionally, that scope model (C/2) did not have a stadimeter or RAOBF, 2 features present in earlier attack scope models but which were dropped in favor of better optical quality. Mostly data was gathered on the surface (by matching or rough plotting), and range was largely irrelevant due to the fact they shot at low gyro angles.
__________________
Ask me anything about the Type VII or IX! One-Stop Targeting Shop: https://drive.google.com/drive/folde...WwBt-1vjW28JbO My YT Channel: https://www.youtube.com/channel/UCIJ...9FXbD3S2kgwdPQ |
|
![]() |
![]() |
![]() |
#3 | |
Sailor man
![]() Join Date: Jul 2014
Posts: 43
Downloads: 4
Uploads: 0
|
![]() Quote:
What is the use of having the horizontal scale in degrees? Also I kinda understand the case against the stadimeter... But the RAOBF ring was just sitting around the eyepiece, right? What does that have to do with optical quality? I remember seeing the kinds of scopes, like the ones shown in the article, in one of the mod packs, for Silent Hunter V. Just curious, is there an actual photo showing the view? Though I was originally referring to the ones that look more like what we have in stock Silent Hunter and Wolfpack, this kind: ![]() Is that a different model or manufacturer? Perhaps, an earlier-war or pre-war version? Do those scales look like centiradians? I am not too sure... Notice the lack of degree signes next to the numbers. Unlike what was shown in the drawings. Hitman's mod, from what screenshots I found, uses both types. The night scope is similar to the article drawings, and, at the same time, the attack scope is similar to the photo. ![]() ![]() |
|
![]() |
![]() |
![]() |
#4 |
Grey Wolf
![]() |
![]()
The degrees in the horizontal were to be able to eyeball spread angles quickly.
Earlier attack scope models had the RAOBF rings around the ocular, but if you look at pictures of the fixed-eye attack scope (C/2), those rings don’t exist. What you have to understand about the RAOBF when it was implemented in the earlier scopes is that it was integrated with the stadimeter, such that when you turned the prisms, the rings turned automatically. So it was all one unit. After measuring the range vertically, the prisms were turned 90° and the same thing was done with the target length, and you had range and angle on bow as outputs on the rings. Both however being dependent on accurate target height and length, both of which cannot be (and weren’t) relied on in wartime. Those scales with the tens are indeed in centiradians. Now, that’s a good question, that may in fact be a reticle of an early scope model. As for the attack scope one that I mentioned (C/2, the most common wartime one), I know that one for sure since I have access to the service manual for that periscope. The only doohickey it had on it was a true bearing counter. But overall, the tactical advantage of being able to raise and lower the scope by way of a lever while sitting in one spot was huge, because the skipper could keep the head of the scope right at the waterline at all times. So it was definitely a trade off, in more ways than just optical quality, I can’t quite remember all of the others. The hitman optics I’m referring to though are the ones in his GUI, not his plain optics mod, which is what the above I think is from.
__________________
Ask me anything about the Type VII or IX! One-Stop Targeting Shop: https://drive.google.com/drive/folde...WwBt-1vjW28JbO My YT Channel: https://www.youtube.com/channel/UCIJ...9FXbD3S2kgwdPQ |
![]() |
![]() |
![]() |
#5 | |
Sailor man
![]() Join Date: Jul 2014
Posts: 43
Downloads: 4
Uploads: 0
|
![]() Quote:
I never knew that bit. Always thought it was just a calculator, akin to the American calculators, such as the Omnimeter, the hand held slide ruler. Now, that I am looking closely at the real life pictures, the thing does not even have the Optische Länge scale that all the mods in the sim have. So no way to use it manually... Does that mean features like speed computation are entirely fictitious? And it took me a while to realize the original German name was not RAOBF... Stupid me ![]() ASR C/6 has it: ![]() This is actually very confusing. Is C/6 not a Later-war model? The first article mentioned it was meant for the Typ XXIII. At the same time it is clearly not a stand-scope. By the way, why the two separate eyepieces? The C/2, what year was it introduced? Did the early-war boats have something else as their turm scope? Was there some other mod of the StaSR? Logic suggests there should be a C/1 somewhere. ![]() |
|
![]() |
![]() |
![]() |
#6 |
Grey Wolf
![]() |
![]()
I agree yeah seems odd, the numbering. My understanding was it was always early war scopes that had that integrated system. That system was developed after World War I. The C/2 I want to say came around in early 1940, at least that’s the earliest I see it being referred to in the KTBs. The type 21 had the C/2, as well, not sure about any of the other late war boats. Early war attack scopes looked like the one you have pictured. That scope can be seen today in the Vesikko submarine in Finland, a prototype of the Type II.
Speed calculations were typically by matching on the surface, or rough plotting. If they did not have the opportunity to follow the target on the surface, and had to dive quickly upon sighting, they fell back on either eyeball estimation or the fixed wire method, which we are familiar with, timing the target from bow to stern, but based on an estimate of the target length, since they never quite knew this exactly. These guys simply just got very close, 500 to 1000 m. They were very skilled at eyeballing angle on bow, and range was mostly irrelevant because they shot at low gyro angles, so that whole unit was really redundant in practice.
__________________
Ask me anything about the Type VII or IX! One-Stop Targeting Shop: https://drive.google.com/drive/folde...WwBt-1vjW28JbO My YT Channel: https://www.youtube.com/channel/UCIJ...9FXbD3S2kgwdPQ |
![]() |
![]() |
![]() |
#7 | |
Silent Hunter
![]() Join Date: Dec 2004
Location: AN9771
Posts: 4,892
Downloads: 302
Uploads: 0
|
![]() Quote:
As for centi- or mili-radians, this is not limited to the metric system! This applies equally well to the imperial system. It is just that in the imperial system height is usually measured in feet, and length or distance in yards. So you need to include a conversion factor of 3 in it. Or start measuring height in yards as well. Considering 2000 yards is close to 1 nautical mile (good enough for government work) this is not such a bad idea. Essentially, centi-radians (or milliradians) means you are talking about a slope of 1 over 100 distance (respectively 1 over 1000 distance). So if something is 3 milliradians then it is 3 yards (or 9 feet) high at 1000 yards distance. Similarly, if it is actually 27 yards high, you are 9000 yards distant from it. The same can be done in metric as long as you maintain the same system for both height and distance. 30 meters high over 2000 yards does not result in 15 milliradians. (though you will be close to within 10% error. ballpark quality)
__________________
My site downloads: https://ricojansen.nl/downloads Last edited by Pisces; 01-09-21 at 01:15 PM. |
|
![]() |
![]() |
![]() |
#8 | |
Ocean Warrior
![]() |
![]() Quote:
![]()
__________________
"Realistic" is not always GAME-GOOD." - Wave Skipper ![]() |
|
![]() |
![]() |
![]() |
#9 |
Grey Wolf
![]() |
![]()
Haha indeed!
Truth is stranger than fiction in this case, in the manual it’s even wilder: Zählwerk für rechtweisende Peilung
__________________
Ask me anything about the Type VII or IX! One-Stop Targeting Shop: https://drive.google.com/drive/folde...WwBt-1vjW28JbO My YT Channel: https://www.youtube.com/channel/UCIJ...9FXbD3S2kgwdPQ |
![]() |
![]() |
![]() |
|
|