SUBSIM Radio Room Forums

SUBSIM Radio Room Forums (https://www.subsim.com/radioroom/index.php)
-   SH5 Mods Workshop (https://www.subsim.com/radioroom/forumdisplay.php?f=249)
-   -   [REL]The Wolves of Steel - SH5 Megamod (https://www.subsim.com/radioroom/showthread.php?t=210703)

Coldcall 05-22-16 05:34 AM

So I am finding HT rather more like boring times. I am blanking many patrols and crew morale seems very delicate. They are down a few morale points within a week or so of patrol time as there is nothing to sink. The chef seems only good for about 1 special meal, then because morale is so low he wont even cook another a week later. I have been using a lot of promotion points on the Bosunīs passive morale abilities, but it doesn't seem to help much.

The radio convoy contact reports often donīt actually show up in the Captains log info (long/lat) so no way of knowing which report is where in order to gauge if its a lead worth following or can be caught without burning too much precious fuel.

Also the grids i am being sent to appear to have no traffic whatsoever so instead of burning fuel often i just sit there and wait the 48/72 hours, submerging once in a while to check the hyrdophone. Lots of whales, no ships :D

J0313 05-22-16 03:48 PM

Quote:

Originally Posted by Trevally. (Post 2406165)
They are different in each opbective

When you get your mission orders it will say to patrol an area. You will then get radio message with new info "Patrol AN5517 zone radius 120 km. Time of patrol 48 hours. BdU"

Is this not happening?

I haven't gotten that far yet but I will let you know if it isn't. Like I said I am new to SH5 and I don't have awhole lot of time to play so it's going to take some time.

J0313 05-22-16 03:50 PM

Quote:

Originally Posted by THEBERBSTER (Post 2406124)
Hi J
My apology for coming on a bit strong.
Courtesy acknowledgement to vdr1981.
Peter

It's okay bro, no need to apologize. I was just explaining my situation is all.

Coldcall 05-23-16 05:38 AM

So I reinstalled WOS as about half way through Happy Times I could not get out of Lorient/Brest area without CTDs. Tried various times on minor time compression without luck. Also tried restoring the bunker save at Lorient and choosing new mission but each time i reached about 100 KM from Lorient on way to Atlantic I had a CTD. No error messages. I was experiencing this once in a while before usually when returning to port or approaching enemy ports on patrol. But usually in those cases a reloading a save fixed the problem.

I am aware of the need to use low time compression near ports/land.

So I am wondering if there are some settings I can use or any other mods I can load after WOS which might limit the amount of CTDs? I only have 4 gig RAM so could that be a problem?

Any advice much appreciated as with this many CTDs it is becoming almost unplayable.

Micksp 05-23-16 08:05 AM

Quote:

Originally Posted by Coldcall (Post 2406407)
So I reinstalled WOS as about half way through Happy Times I could not get out of Lorient/Brest area without CTDs. Tried various times on minor time compression without luck. Also tried restoring the bunker save at Lorient and choosing new mission but each time i reached about 100 KM from Lorient on way to Atlantic I had a CTD. No error messages. I was experiencing this once in a while before usually when returning to port or approaching enemy ports on patrol. But usually in those cases a reloading a save fixed the problem.

I am aware of the need to use low time compression near ports/land.

So I am wondering if there are some settings I can use or any other mods I can load after WOS which might limit the amount of CTDs? I only have 4 gig RAM so could that be a problem?

Any advice much appreciated as with this many CTDs it is becoming almost unplayable.

Because I'm not an expert in SH5, I'll share my own opinion based on my own experience:
I have Win 7 Ultimate Pro OS, CPU- AMD Athlon X4 5350 /2.05GHz/ 2MB Cache/ AM1, GPU Nvidia GeForce GT 705-DDR III 2 GB, RAM-DDR III-8 GB, HDD 2 TB. I'm playng the SH5-TWOS Upd 12 from two months without any CTD. The game runs very light and stable. In comparison, in the past I've tried it whith 4 GB RAM and it was baad.
In other hand, it is always recommended to use as lower TC as possible near ports and shore, also potential action zones. It is a good idea to load your last save, then quit without new save and reload the same.

vdr1981 05-23-16 08:42 AM

Quote:

Originally Posted by Coldcall (Post 2406407)
So I reinstalled WOS as about half way through Happy Times I could not get out of Lorient/Brest area without CTDs. Tried various times on minor time compression without luck. Also tried restoring the bunker save at Lorient and choosing new mission but each time i reached about 100 KM from Lorient on way to Atlantic I had a CTD. No error messages. I was experiencing this once in a while before usually when returning to port or approaching enemy ports on patrol. But usually in those cases a reloading a save fixed the problem.

I am aware of the need to use low time compression near ports/land.

So I am wondering if there are some settings I can use or any other mods I can load after WOS which might limit the amount of CTDs? I only have 4 gig RAM so could that be a problem?

Any advice much appreciated as with this many CTDs it is becoming almost unplayable.

Try to save and restart your game completely approximately 50-60 km from the port, or just before you expect your game to CTD...
Also , error report from windows event viewer would be helpful...



Only 4GB of RAM here too, but my Atlantic patrols are very stable even if I sometimes ignore my own tips for stable gameplay...:yep:.
I hope you haven't "over tweaked" something recently...:hmm2:

Coldcall 05-23-16 09:43 AM

Quote:

Originally Posted by Micksp (Post 2406443)
Because I'm not an expert in SH5, I'll share my own opinion based on my own experience:
I have Win 7 Ultimate Pro OS, CPU- AMD Athlon X4 5350 /2.05GHz/ 2MB Cache/ AM1, GPU Nvidia GeForce GT 705-DDR III 2 GB, RAM-DDR III-8 GB, HDD 2 TB. I'm playng the SH5-TWOS Upd 12 from two months without any CTD. The game runs very light and stable. In comparison, in the past I've tried it whith 4 GB RAM and it was baad.
In other hand, it is always recommended to use as lower TC as possible near ports and shore, also potential action zones. It is a good idea to load your last save, then quit without new save and reload the same.

Okay thanks. In that case itīs not my rig that is the problem. I will try the reload, then restart game and reload again trick.

Yes I just came back from 2nd mission based at Wilhelmshaven and used 32 TC into port with no CTD. Fingers crossed.

Coldcall 05-23-16 09:56 AM

Quote:

Originally Posted by vdr1981 (Post 2406446)
Try to save and restart your game completely approximately 50-60 km from the port, or just before you expect your game to CTD...
Also , error report from windows event viewer would be helpful...



Only 4GB of RAM here too, but my Atlantic patrols are very stable even if I sometimes ignore my own tips for stable gameplay...:yep:.
I hope you haven't "over tweaked" something recently...:hmm2:

No I haven't over-clocked or tweaked anything. I have the TC settings as instructed in the TWOS install procedure.

I looked at the Windows event viewer, could not find anything. Is there something or a specific log i should be looking at?

Yes the reload usually works when its a coming into port CTD, though admittedly I usually do not restart the game, just reload, but it usually works. The CTD i kept having in my last campaign in HT about December 1940 was leaving Lorient and heading in a WNW direction. About 100-150 km out it would CTD. Tried many different things, nothing worked. I even rebooted computer, and then restarted SH5, reloaded the bunker save, chose another mission set out again and CTD continued. Maybe I had a corrupt set of saves from the Bunker save?

Oh well, making my way through Total Germany again. Just intercepted a massive convoy in North Sea, off a radio lead which happened close by luckily. No duds! Sunk 3 for 14k tons! I was thinking, please dont CTD now :-)

Trevally. 05-23-16 09:58 AM

Low ram mem (4gb) with a high vid card ram (2gb) is the worst combo under a 32 bit OS:arrgh!:

Coldcall 05-23-16 10:53 AM

Quote:

Originally Posted by Trevally. (Post 2406463)
Low ram mem (4gb) with a high vid card ram (2gb) is the worst combo under a 32 bit OS:arrgh!:

hehe oh great. I guess i should get another 4 gig ram, just been too lazy.

Trevally. 05-23-16 11:21 AM

Quote:

Originally Posted by Coldcall (Post 2406474)
hehe oh great. I guess i should get another 4 gig ram, just been too lazy.

:D
Re-reading the mem posts - I think it was 2GB ram and 1 gb vidoe (ah those were the days:D)

Quote:

Originally Posted by Trevally. (Post 2406463)
Low ram mem (4gb) with a high vid card ram (2gb) is the worst combo under a 32 bit OS:arrgh!:

See here
http://www.subsim.com/radioroom/show...&postcount=316

vdr1981 05-24-16 12:43 PM

Quote:

Originally Posted by Coldcall (Post 2406461)
Tried many different things, nothing worked. I even rebooted computer, and then restarted SH5, reloaded the bunker save, chose another mission set out again and CTD continued. Maybe I had a corrupt set of saves from the Bunker save?

So, did try what I have told you to do or not?:hmm2:

Error log should be in Event viewer- Windows logs - Application

TheBeast 05-25-16 01:01 AM

Quote:

Originally Posted by Coldcall (Post 2406461)
Yes the reload usually works when its a coming into port CTD, though admittedly I usually do not restart the game, just reload, but it usually works. The CTD i kept having in my last campaign in HT about December 1940 was leaving Lorient and heading in a WNW direction. About 100-150 km out it would CTD. Tried many different things, nothing worked. I even rebooted computer, and then restarted SH5, reloaded the bunker save, chose another mission set out again and CTD continued. Maybe I had a corrupt set of saves from the Bunker save?

Are you using Snorkel? if so, is it Vertical or Horizontal Snorkel.
If any exhaust is enabled TWOS does not like it and you will need to disable all exhaust.

Coldcall 05-25-16 01:37 AM

Quote:

Originally Posted by TheBeast (Post 2406854)
Are you using Snorkel? if so, is it Vertical or Horizontal Snorkel.
If any exhaust is enabled TWOS does not like it and you will need to disable all exhaust.

No not used snorkel at all.

Coldcall 05-25-16 01:42 AM

Quote:

Originally Posted by vdr1981 (Post 2406741)
So, did try what I have told you to do or not?:hmm2:

Error log should be in Event viewer- Windows logs - Application

You mean reloading just before the CTD normally happens? Yes tried that recently with the odd CTD and it works. But I have restarted whole campaign and reached HT again.

I looked at the error logs and cant see anything related to SH5. Iīd publish it here but itīs huge. Are there specific entries I should be looking for? I cant even tell which entries are related to the CTD.

vdr1981 05-25-16 08:35 AM

Quote:

Originally Posted by Coldcall (Post 2406858)
You mean reloading just before the CTD normally happens?

Not a "reload"...You have to exit the game completely.

auricom 05-25-16 08:41 AM

hi guys,

I am playing U-28 w/ 11 kills (+1 warship and 3 aircraft) into the Operation Monsun campaign in TWoS. I have exhausted my supply of torpedo's and am trying to 'load' my external reserves.

I've tried several saves/reloads.. Surfaced, running slow with calm weather conditions i have tried dragging the external store into the 'internal storage' slot, and the tube itself but nothing work.. it never 'drags' out of the box and never loads anywhere.

Any suggestion on how to make it work? Is this a known bug?

Coldcall 05-25-16 08:46 AM

Quote:

Originally Posted by vdr1981 (Post 2406916)
Not a "reload"...You have to exit the game completely.

Yes I tried that with the Brest/Lorient CTD which kept happening. Did not work. Thatīs why I reinstalled from scratch.

Any ways so far out of Lorient in this new campaign, 2 missions, no crashes in or out of port. Fingers crossed. I am keeping way more saves now :D

Edit: In fact was thinking about that again, and yes every time it CTDs i have to restart the game. I am bumped out completely and Uplay goes through itīs syncing saves malarkey.

vdr1981 05-25-16 10:08 AM

Quote:

Originally Posted by auricom (Post 2406917)
Is this a known bug?

Nope...

Quote:

Originally Posted by Coldcall (Post 2406919)
Yes I tried that with the Brest/Lorient CTD which kept happening. Did not work. Thatīs why I reinstalled from scratch.

Any ways so far out of Lorient in this new campaign, 2 missions, no crashes in or out of port. Fingers crossed. I am keeping way more saves now :D

How about to upload that problematic Lorient bunker gamesave?

Trevally. 05-25-16 11:35 AM

Quote:

Originally Posted by auricom (Post 2406917)
hi guys,

I am playing U-28 w/ 11 kills (+1 warship and 3 aircraft) into the Operation Monsun campaign in TWoS. I have exhausted my supply of torpedo's and am trying to 'load' my external reserves.

I've tried several saves/reloads.. Surfaced, running slow with calm weather conditions i have tried dragging the external store into the 'internal storage' slot, and the tube itself but nothing work.. it never 'drags' out of the box and never loads anywhere.

Any suggestion on how to make it work? Is this a known bug?

I am sure I can remember this being an issue (a few years ago). I feel it was tagged to a boat type (B perhaps?).:hmmm:

I assume you are in good weather, all stopped ans fully surfaced


All times are GMT -5. The time now is 04:57 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright Đ 1995- 2024 Subsim®
"Subsim" is a registered trademark, all rights reserved.