Originally Posted by vdr1981 (Post 2389588)

Guys, dont forget that you can use "C" key to reposition your nav fixes and therefor help your navigator... Dead reckoning accumulated error can be corrected quite easily IF you have some landmark in sight...If not, well, then open four eyes and 10kn at max with minimal TC...:yep:

Originally Posted by palmic (Post 2389600)

I always fixes my position by C (well i did not know about this shortcut, i used pencil :-) ) when i calculate one :salute:
+ i nerfed down max TC to 128 and its much better for me, i still had no lagging exploit when "something" is around :)

BTW: ****! i want that avatar out, keeping posting! :o

Originally Posted by LesBaker (Post 2389532)

This is from the documentation in TWOS.

Range estimation
================
Binoculars and scopes have milliradian scales that allow to estimate/measure distances: "10" on the attack scope corresponds to "100" on the observation scope and represents roughly 100 milliradians (~5.73 degrees at low power magnification, at high power it's 4 times less: 25 milliradians or ~1.43 degrees).
One large mark on the binoculars represents roughly 10 milliradians (~0.573 degrees).
The markings are used as follows: given a target of height H that takes up M markings, its range R can be calculated:
R = H*k/M
where k is:
- 100 for attack scope low power and binoculars
- 400 for attack scope high power
- 1000 for observation scope low power
- 4000 for observation scope high power
Example:
Imagine you're observing a Liberty Cargo (mast height ~26m) through an observation scope at high power and ship's mast reaches "100" mark. Then the range will be:
26 * 4000 / 100 = 26 * 40 = 1040 meters
If you'd go up to conning tower and observe the ship through attack scope now (don't forget high power), its mast will reach "10" mark. Let's check the range:
26 * 400 / 10 = 26 * 40 = 1040 meters
RAOBF should give you something close to this value (between "10" and "11" on the range ring).
If you now surface and observe the target through your binoculars, it will take up 2.5 marks:
26 * 100 / 2.5 = 1040 meters
Mental rule for k:
"Normally x100, additional 0 for observation scope, additional x4 for high power magnification" ;)
Take note that horizontal scale on the observation periscope is in degrees. I don't know for sure why that is, and the sources are scarce, but I believe this could be helpful for navigation and for estimating target's angular size i.e. to set salvo spread angle.

Les

Originally Posted by oscar19681 (Post 2389850)

Question, when i click the LI and click manual dive planes the auto dive planes remain highlighted. Whats the trick to manually operate them?

Originally Posted by palmic (Post 2389821)

Where can i find this documentation? I tried even to search for strings from this post in TWOS files by total commander and found nothing..

Originally Posted by vdr1981 (Post 2389871)

There is no trick if you have properly activated gen.patcher and the snapshot? Did you?:hmm2:

EDIT:

http://s6.postimg.org/8sxmoeei5/SH5_...6_14_51_52.jpg
https://www.youtube.com/watch?v=Inzh39SQtTY

Originally Posted by oscar19681 (Post 2389403)

FHaving A strange issue. After i have installed my u-boat stutters in external view.It also seems to stutter somswhat less when on the bridge. It only seems to effect my u-boat And Everything else runs as smooth as silk. Can anyone tell
Me whats causing this?

Originally Posted by Warham (Post 2389178)

Does OldStyleExplosions V1.1 mod compatible with TWoS? Is there any nice video with TWoS like trailer?

2) Search script from some time don't accelerate time to x128. And he began to set maximum boat speed although earlier speed was small forward.

Can it be fixed?

Originally Posted by Husksubsky (Post 2390040)

I still use the antilag fix. Doesnt most use it? D3d.dll and a. Ini file . Some settings was adviced by sober. Fps 35and rnder ahead 2?

Originally Posted by Sjizzle (Post 2390060)

there are plenty of players who use the Antilag the correct settings are

Originally Posted by Husksubsky (Post 2390045)

All scripts start with leaving navmap and increase surfacespeed for quicker dive. If a contact is detected, TC will be set to one. Otherwise 128/4 script will resurface and go 32 x until recharge initiated(need OFEV edit.) then go 128X.

Apology for boats not keeping direction will fix it among other details. Anyone for a 256 option? I use 32 for myself :))

After surfaced FE (fueleconomy) Will set surface speed to slow.

Originally Posted by Warham (Post 2390086)

Thanks for info. Where are the scripts stored? I want to set 256х instead of 128. Or it will make some problems?

Originally Posted by THEBERBSTER (Post 2390010)

The Real Navigation mod is from patch no.8.

Originally Posted by Raven1976 (Post 2390007)

Hello guys i have a question: After you finish your patrol and return to your homeport how do you dock? I cant see any docking button (the one with the anchor).
I tried shift-z but nothing happened. Is there another button for this?

Originally Posted by oscar19681 (Post 2389995)

I installed with gen mod enabler in this order.