Radione R3
 

Hi,

I am currently working on a new radio and I will replace the existing one with a Radione R3 (https://www.cryptomuseum.com/spy/radione/r3.htm).

https://i.postimg.cc/bv6jPWHr/16f658...254350b5db.jpg

short Story about Radione R3:

In 1924 the brothers Dipl. Ing. Nikolaus and Theodor v. Eltz the company "Rundfunkapparatefabrik RADIONE" in Vienna. In the years 1938/39 the Radione R2 radio receiver was produced as a travel radio. The Radione R3 was produced as a military version. This radio receiver was built between 1942 and 1943. He was a shortwave receiver. Mains operation could be changed from 110 to 220 VAC using a cube plug. Battery operation with direct current was also possible. The device had a dynamic speaker. The case was made of metal.

https://i.postimg.cc/50R6GKWK/Radione-R3-ingame.jpg

The final version has been released: https://www.subsim.com/radioroom/dow...o=file&id=6345

Great! Waiting it...:Kaleun_Applaud:

Many thanks.

Fitzcarraldo :Kaleun_Salute:

First beta version v0.5 has been released. Update first post.

https://i.postimg.cc/ZRGG2CWJ/SH5-Im...7-20-13-39.png

Many thanks!

Downloading now.:Kaleun_Wink:

Fitzcarraldo :Kaleun_Salute:

The final version has been released. Update first post.

Many thanks!

Fitzcarraldo :salute:

Now I'm thinking about replacing the standard gramophone with a period suitcase gramophone from Triumphon? :hmmm:



A gramohone like this one:


https://i.postimg.cc/tRwPJJnZ/DSCF0898.jpg

Like this...

Many thanks for the job.

Fitzcarraldo :Kaleun_Salute:

I'm just trying to make SH5 nicer and better, like many others here. :Kaleun_Wink:

Unfortunately you can't get rid of all bugs.

Work very well in my TWoS. Adopted.

Many thanks.

Fitzcarraldo :Kaleun_Salute:

This one works with stock version and TWoS. :Kaleun_Salute:

Hope you can make a new gramophone as the Triumphon. :Kaleun_Wink:

Thanks.

Fitzcarraldo :Kaleun_Salute:

I hope so too. But I think I need more time for this, because it is not so easy to find perfect pictures at the correct angle and good quality.
I was also on vacation last week, so I had a lot of time to create the radio. :D

The Radione R3 is also visible in the movie Das Boot from 1981 above the actor and singer Herbert Grönemeyer as lieutenant Werner:


https://image.bz-berlin.de/data/uplo...le&imwidth=992


https://a2.tvspielfilm.de/imedia/855...xedKHyuA==.jpg

Well done GrenSo! :up:

If you like, you can adopt my skin of a Radione R2 for your mod:

https://i.imgur.com/iY0HGUF.png

I can have a try but this needs more time that the current version of the R3, because:

1. The button animation is not a click animation but a roation animation and I haven't done that yet and I don't know how it can be implemented with the function of volume
2. The choice of frequency is also a roation animation and it's depents of the used radio mod where the pointer will stop
3. Or as an alternative to 2. the frequency display have to split up into 360° and the pointer use the displayed and used frequency from the used radio mod or rather of the used one radio.ini.

But until I will try to adopt your Radione R2 with all functions, I will first finish my new version of the Electrola C106UPgramophon. https://www.subsim.com/radioroom/sho...d.php?t=252869

I am aware of those limitations. We can't get knobs to rotate realistically. My ideas on some possible workarounds

• Radio tuning knob
  
  The 'Abstimmung' (frequency selection) knob might be divided in two parts, left and right, with a slight overlapping over the center maybe. Each half should behave as a separate button; the right half as the 'forward' button, and the left one as the 'back' button.
  When one of the buttons is hovered with the mouse cursor, it gets highlighted, but in place of a regular highlight texture a texture with a different rotation of the knob will be triggered; clockwise for the forward button and counter-clockwise for the back one.
  If one of the button is clicked, it should quickly rotate another notch either clockwise or counter-clockwise before returning to the original position, so to denote that the station tuning has been correctly triggered.
  
  
• Tuning needle indicator
  
  To the best of my recollection, in stock game the indicator rotates randomly while the radio is searching for the next station, and the position where it stops brings no relation with the frequency of the tuned station, but I can be wrong on that. If the latter is the case, cool, the following website has high resolution pictures of a Radione display:
  
  http://www.museum-zwentendorf.at/438...ione-r9-1.html
  
  We could use the information contained in those pictures to setup realistically the frequencies of the radio stations available in game. Nonetheless, as you already noted, for getting the correct visual output we should make the neeedle to rotate 360 degs, if possible. If not, that's okay too. After all we can't turn a submarine simulation into a radio tuner simulation :D
  
  
• Tuning display and volume knob
  
  We should convert the 'Lautstärke' knob into a play/pause button. Again, hovering that button should "turn" it by one notch, meaning that the button can be clicked. Clicking the button should turn it by another notch. Clockwise for switching from pause to play and vice-versa.
  When the radio is in 'pause' mode, the tuning display should be dark, but it should get lit when the radio is in play mode. Doing so might require the knob and the display lens to be part of the same button though. Note that the lit and unlit lenses in my texture are semi-transparent, so they can overlap the tuning needle giving the impression that the needle is placed below the lens.
  
  
• Handle
  
  That should be the spot where you can click for dragging the radio. I have provided an highlighted handle so to make clear for the player that the mouse is in the correct position, but for the same purpose I could create a curved/extended version of the same handle.

For getting all of the above to work as supposed, my texture might require some editing/rearrangement, but that's not a big deal as I have it in photoshop format with most of the interactive parts in separate layers.


Take your time on that :up:

Now THAT is so FREAKING NICE!!!
:o
:salute:

Thank you Jeff. This has been waiting on my HD for ages, together with many unfinished/unreleased mods :oops:

Yes. But the R3 as simulated by GrenSo works very well AND is in the movie Das Boot. That is a point...

If it is possible simulate the R2 it will be great, but I addopted the R3.

BTW, the dial in SH4 and SH5 has an indicator moving as crazy when you search a radio station. No indication of frequencies. This limitation has the advantage you can add other radio stations, as I did in FOTRSU and TWoS. The indicator (needle) is only an animation - candy.

Best regards.

Fitzcarraldo :salute: