Quote:
For Type VIIA , only Tiger stripes and yellow stripe coatings are working fine... Edit: I think I'll just remove problematic paint schemes in the next patch until I find solution for the problem, if possible at all... |
Hey Vecko,
Quick question/theory... I see that you have periscope depth set at 12 instead of historical 13.5 meters. I know that we can adjust ourselves but then I thought about something. Do you have it set this way because the game uses periscope extension length to determine detection chance REGARDLESS of the actual length of the scope that shows above the water? It would be too many calculations to determine the actual length of scope above water with the waves and all so the game just uses whatever the scope extension length is to determine detection chance? So if we are deep and only have just the scope,tip,above water we have a high detection chance because we are fully extended? Is this how it works?:hmmm: |
I see that you have periscope depth set at 12 instead of historical 13.5 meters. I know that we can adjust ourselves but then I thought about something.
Actually, periscope depth is set to 12 m because anything deeper and your OBS scope will not reach sea surface. I don't know is this realistic or not but because of the changes from some mods, extension length of obs scope is such as it is... Snorkel depth command however matches historical periscope depth (13-14m) and usually I use this command for normal engagement with attack scope. Attack scope also has slightly longer extension length (again, I'm not sure how realistic is this but that's the way it is). Do you have it set this way because the game uses periscope extension length to determine detection chance REGARDLESS of the actual length of the scope that shows above the water? It would be too many calculations to determine the actual length of scope above water with the waves and all so the game just uses whatever the scope extension length is to determine detection chance? So if we are deep and only have just the scope,tip,above water we have a high detection chance because we are fully extended? I'm not 100% sure but I think that AI visual sensor distance really depends of how much your scope sticks out of the water, regardless of your depth and periscope extension... If you enable map contacts together with appropriate options for TAI/NAV map using OFEV app, you can test this in single missions...:yep: |
Hi Vecko
This is the first opportunity I have had to end my patrol and upgrade from patch 3 to patch 8. There is a fault in Patch 8 The fault is in the Real Navigation Mod. Patch 8 with my old Real Navigation Mod works ok. The JSGME picture has the basic mods enabled with the new Real Navigation Mod from patch 8. http://i57.tinypic.com/2w3dsgp.jpg This picture shows the problem in the bunker with Real Navigation not working as it should. Map contacts are enabled in my games. http://i57.tinypic.com/5ciq79.jpg Peter |
There is no "old" and "new" The Wolves of Steel 1.04 - Real Navigation_by TheDarkWraith mod.
You should have only 1 in your JSGME, but I can see 2 on your picture?:doh: You have overtweaked something...:D My bet is that one two RN modes of yours has only menu.txt in it, probably the one which is activated... :yep: By the way, have you received VIIB sub yet? |
Peter, you have to roll back Real Navigation Mod before activating the new patch 8. Otherwise, you get two Real Navigation Mod. Enabling Real Navigation AFTER enabling patch 8 :salute:
Mikael |
Hi Vecko,
Yes, there is 2. The 1 that came in the v1.04 download if you remember you spelt Wraith incorrectly as Wright. http://i62.tinypic.com/2cijr7b.jpg Patch 8 has a mods folder in it with another version of Real Navigation with Wraith spelt correctly. http://i58.tinypic.com/k12xxh.jpg When patch 8 is in enabled another Real Navigation appears in JSGME un-enabled as you can see in picture 2 in my original post showing 2 versions. Having 2 can appear because they are not spelt the same. The Wolves of Steel 1.04 - Real Navigation_by TheDarkWright The Wolves of Steel 1.04 - Real Navigation_by TheDarkWraith If you enable patch 8 with the Wraith you get the problem in picture 2 If you enable patch 8 with the Wright you get the correct Real Navigation. All I have done is remove patch 3 and replace it with patch 8 with the later/new version of Real Navigation > Wraith Peter |
Quote:
Still in type VIIA? |
Hi Vecko
My apologies for not answering your question about the upgrade. I got caught up in my problem. Upgraded to a VIIB about 20 manual saves ago during N.W.A. Had a large tonnage total may have triggered it. No I do not know how to get over the current problem other than to use patch 8 with the original Real Navigation mod that came with the v1.04 download. Whether this is a practical solution or not I do not know as I do not know what changes were made in the later Real Navigation mod. I notice that Real Navigation were also added to both patch 4 and patch 7. I have not used either of these as I am jumping from patch 3 to patch 8. Always open to some help any time. Peter |
Quote:
1. Deactivate all mods except TWoS 1.04 (main mod) 2. Delete both Real Nav mods from your JSGME (Wright and Wraith:)) 3. Then, Download this correct Real Nav mod and add it to your JSGME. 4. Then, activate mods in appropriate order (you know the order) Don't worry , you can do this in the middle of the patrol...:yep: Quote:
|
Hi Vecko
Thank you for the file. Peter |
i have problem
i have unknow problem with MCCD 1.04 . Game crash with it how to remove it to megamod:timeout:
|
Hi,
just question about campaign from WofS. Im in the second patrol and recived orders with the new area for patrol. What I can do if I haven't now any torpedos? Deck gun is still present but sometimes it is not enough. Is it possible to back to Kiel (for example) and repair systems and take a fuel, torpedos and back to new area patrol too (btw I dont see resuply request radio message or button too - for milk cow, is it will be later)? |
Hi YoYo
First check that your base is still in Kiel and has not moved to Wilhelmshaven. If it is still Kiel then you can refit at Heligoland. If it is has moved to Wilhelmshaven then you can end the patrol there and request the same mission that you are currently on again. There is a supply ship available for a few weeks South West of mainland GB. Useful if you are doing patrols N.W.A. or S.W.A. You will get a radio message and see it on the map. There is another supply ship in Cadiz, Spain from February 1940. http://i58.tinypic.com/icmqnk.jpg Peter |
Thank You,
You have right, for sure Wilhelmshaven. When I'll back the mission will be available from the last status of patrol (some of patrol area was finished) or from the beginning again. |
Hi YoYo
Start a patrol with the same mission with a new patrol area. Peter |
When reporting a problem/bug/CTD, please make sure to provide answers to following questions:
- Operating System, System spec ? - What is your version of the game ? (DVD, Uplay download, Steam) - Confirm that your game is updated to official v1.2.0 version. - Provide a screenshot which will show all content and installation path of your main Silent Hunter 5 install folder. - Confirm that you have checked for solution in provided install instructions and other documentation? - Specify mods you're using and state your mod order (do not type the list manually, use "Export activated mods list to" JSGME function). - If you use any unsupported mods, remove them, reinstall your game/TWoS completely according to install instruction, start new campaign and make sure that the issue still persist. - Make sure to provide as much details as possible when describing situation where problem/bug/CTD can be observed. What should we do in order to reproduce this issue? - Upload several screenshots and gamesaves where problem can be observed. Any report with less details or report like "HELP MY GAME CTD RANDOMLY ALL THE TIME :/\\!!:timeout::down::hmph: !!!" is not helpful at all and it will only cause confusion. Be thorough in your bug reports so we can diagnose, fix or discard the issue with less time consuming efforts, otherwise we wont see much use of it and I wont bother to answer... |
Quote:
http://i921.photobucket.com/albums/a...pspvnz7xhe.jpg http://i921.photobucket.com/albums/a...psjoscrvzn.jpg btw. is it possible to manually change a periscope depth (in cfg for example)? I dont know why but my is betweet 13-14 m. on smooth sea so cant use periscope with auto level. |
@ Peter
When you post in future a longer list with entries of your game, please do this with "Code" Function! :03: Because the post is than not too long! Here are a example with Code Function from your post: Code:
[Campaign] |
Hi Magic
Thanks for the info. I did not know about that. Peter |
All times are GMT -5. The time now is 10:55 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1995- 2024 Subsim®
"Subsim" is a registered trademark, all rights reserved.